ADAPTER AS-LINE 1246289 - Caterpillar

General Information
Illustration 1 g00800309
Front Dash (1) Diagnostic service tool connector.Diagnostic service tool connector (1) is located on the right side of the front dash.
Illustration 2 g01200955
Right Rear Corner of Cab (2) Implement ECM. (3) Power Train ECM.
Illustration 3 g00800310
View A-A (4) Fuse panel. (5) Service connector (switch box).Service connector (5) is located behind the fuse access cover in the right rear panel of the cab.The Electrical System Schematic, Parts Manual and Operation and Maintenance Manual for the machine that is being serviced should be used to locate electrical components and connectors.The following information is a guide to reading the tables on the back of the Electrical System Schematic.
The "Component Location" table uses white circles to mark the locations in the profile of the machine and in the area views. Alphabetical letters in the "Machine Location" column indicate a general area of the machine. Refer to the corresponding footnote at the end of the table for a description of the location.
The "Harness Connector Location" table uses white circles to mark the locations in the general view and in the area views. Alphabetical letters in the "Machine Location" column indicate a general area of the machine. Refer to the corresponding footnote at the end of the table for a description of the location.Connector Contact Numbers
Illustration 4 g00554751
Electronic Control Module (ECM)
Illustration 5 g00556522
Machine harness connectors J1 and J2 that connect to the ECM.