AVSPARE.COM
parts catalog

ADAPTER(1-75) 1C4139 - Caterpillar



1C4139 ADAPTER(1-75) Caterpillar parts ADAPTER
Rating:
21
Alternative (cross code) number:
CA1C4139
1C-4139
1C4139
Caterpillar 1C4139 ADAPTER(1-75)
Weight: 4 pounds 2 kg.

Buy ADAPTER(1-75) 1C4139 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Start By:a. remove oil pump The piston and connecting rod were removed for better illustration. 1. Remove bolts (1). Remove piston cooling tubes (2) from the engine. Use Tool (A) to turn the crankshaft in a clockwise direction (as seen from the front of the engine) to get access to all of the piston cooling tubes. The following steps are for the installation of the piston cooling tubes. 2. Check the alignment of the piston cooling tubes with Tool (B). See "Use of 5P-8709 Tool Group for Alignment Of Piston Cooling Jets," SMHS7267 for the correct alignment procedure.3. Install piston cooling tubes (2) on the engine. Use Tool (A) to turn the crankshaft clockwise (as seen from the front of the engine) to get access for the installation of the piston cooling tubes.End By:a. install oil pump


Parts adapter Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.