parts catalog

ADAPTER- 2333080 - Caterpillar

2333080 ADAPTER- Caterpillar parts ADAPTER
Alternative (cross code) number:
Caterpillar 2333080 ADAPTER-

Buy ADAPTER- 2333080 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Illustration 1 g00519030
(1) Strut rod
(2) Shims
(3) Plate
(4) Bolts
Apply 4C-5593 Anti-Seize Compound to the taper of strut rod (1). Assemble the axle to strut rod (1). Install plate (3). Use three bolts (4) and washers that are spaced at 120 degree intervals in order to install plate (3). Do not use shims (2) at this time. Torque bolts (4) to 203 27 N m (150 20 lb ft).
Use a depth micrometer at three threaded holes in plate (3). Measure the distance from the end of strut rod (1) to the outer face of plate (3). Record the average of the measurements.
Personal injury or death can result when working with the strut rod.Sudden release of the spindle from the strut rod or the snapping of a bolt when removing the plate can result in injury.Loosen all bolts one-half turn, working around the plate in a circular pattern. Perform this again and again until the torque is released for the bolts.
Remove bolts (4), washers and plate (3). Measure the thickness of plate (3) near the bolt holes which were used to make the previous measurement. Calculate the average thickness of plate (3).
Install shim pack (2). In order to determine the shim pack thickness, subtract 8.60 0.03 mm (0.339 0.001 inch) from the difference between the average measurements in Step 2 and Step 3. Note: The shim pack thickness must not be less than 0.64 mm (0.025 inch).
Install shims (2), plate (3), and bolts (4). Torque bolts (4) to 1800 200 N m (1328 148 lb ft). Note: After these steps have been followed, the clearance between shims (2) and plate (3) will be 0.00 to 0.13 mm (0.000 to 0.005 inch).

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.