AVSPARE.COM
parts catalog

ADAPTER 3534993 - Caterpillar



3534993 ADAPTER Caterpillar parts 793F CMD ADAPTER
Rating:
33
Alternative (cross code) number:
CA3534993
353-4993
3534993
Caterpillar 3534993 ADAPTER
Weight: 1 pounds 0 kg.

Buy ADAPTER 3534993 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK,

You can buy parts: .

$190.00

12 Aug 2021

CN: Tiankon store
New Turbo Charger Cartridge CHRA 3545697 for Holset Cummins H1C Turbos 4BTAA, 4BT, 6BTA following models.
TKParts Application: Cummins Inc. 4BTAA, 4BT, 6BTA Holset H1C Turbos: 3533517, 3533520, 3534882, 3534883, 3534993, 3534994, 3535080, 3536838, 3536839, 3537422, 3537423, 3537424, 3537425 || To confirm the part number, check the Turbocharger namplate at first.
Number on catalog scheme: 27
 
  For full view, you need register

Compatible equipment models: 3534993:

TRUCK  793F CMD   Caterpillar

Information:

Fan Pump and Control Valve
Operation at Maximum Speed
Illustration 1 g01416483
Fan Pump and Control Valve (Maximum Speed)
(1) Actuator piston
(2) Swashplate
(3) Bias spring
(4) Drive shaft
(5) Fan pump
(6) Piston and barrel assembly
(7) Case drain passage
(8) Output to fan motor
(9) Pin
(10) Plunger
(11) Spring
(12) Solenoid
(13) Adjustment screw
(14) Spring
(15) Orifice
(16) Signal passage
(17) Pump control spool
(18) Pressure control spool
(19) Adjustment screw
(20) Pump control valve
(BB) Cutaway section
(CC) Component surface
(FF) Activated components
(GG) Tank pressure
(JJ) High pressure When maximum fan speed is required, the engine ECM sends minimum signal current to solenoid (12). Plunger (10) blocks signal passage (16). The force of spring (14) plus the signal pressure holds pump control spool (17) downward.When pump control spool (17) is held downward, the passage to actuator piston (1) is open to the case drain. The force of bias spring (3) moves swashplate (2) toward the maximum angle.The pistons travel in and out of the barrel for the maximum distance. The cylinder fills to the maximum amount. The maximum amount of oil flows through output to the fan motor (8). The maximum oil flow to the fan motor causes the fan to rotate at the maximum speed.Pressure control spool (18) limits the maximum pressure of the oil that flows to the fan motor through output (8). If the output pressure overcomes spring (11), the pressure control spool moves upward. High pressure oil is allowed to flow to actuator piston (1). The pump destrokes.Operation at Minimum Speed
Illustration 2 g01416693
Fan Pump and Control Valve (Minimum Fan Speed)
(1) Actuator piston
(2) Swashplate
(3) Bias spring
(4) Drive shaft
(5) Fan pump
(6) Piston and barrel assembly
(7) Case drain passage
(8) Output to fan motor
(9) Pin
(10) Plunger
(11) Spring
(12) Solenoid
(13) Adjustment screw
(14) Spring
(15) Orifice
(16) Signal passage
(17) Pump control spool
(18) Pressure control spool
(19) Adjustment screw
(20) Pump control valve
(BB) Cutaway section
(CC) Component surface
(FF) Activated components
(GG) Tank pressure
(KK) First pressure reduction
(LL) Second pressure reduction When the engine is first started or when the machine is working in a cold climate, the required fan speed for cooling is low. Maximum signal current is sent to solenoid (12).When a slower fan speed is required, the engine ECM increases the signal current to solenoid (12). Pin (9) pushes plunger (10) downward against spring (11). When the plunger moves downward, signal passage (16) is opened to the case drain. The pressure at the top of pump control spool (17) lowers. The pressure at the bottom of the pump control spool overcomes the force of spring (14). The spool shifts upward. This allows pressurized oil to flow to actuator piston (1).When oil flows into actuator piston (1), the force of bias spring (3) is overcome. Swashplate (2) moves toward the minimum angle until equilibrium is reached between the pressure in the actuator piston and the force of the bias spring.The pistons travel in and out of the barrel for a shorter distance. The cylinders fill to a smaller amount. A decreased amount of oil flows through output (8) to the fan motor. The decreased amount of oil flow to the fan motor causes the fan to rotate at a slower speed.Components

Caterpillar parts catalog:

Caterpillar parts catalog
793F OFF-HIGHWAY TRUCK D3T00001-UP (MACHINE) POWERED BY C175 ENGINE
797F Off-Highway Truck LAJ00001-UP (MACHINE) POWERED BY C175-20 Engine
793F CMD Off-Highway Truck (Command for Hauling) RBT00001-UP (MACHINE) POWERED BY C175-16 Engine


Parts adapter Caterpillar catalog:

3418593 ADAPTER AS
725C, 730C, 735B, 740B
3474436 ADAPTER-ELBOW
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 349E, 349E L, 349E L HVG, 349E L VG, 730C, CB-44B, CB-54B
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.