AVSPARE.COM
parts catalog

ADAPTER AS 3535116 - Caterpillar



3535116 ADAPTER AS Caterpillar parts C15, C18, CX31-C18I ADAPTER
Rating:
27
Alternative (cross code) number:
CA3535116
353-5116
3535116
Caterpillar 3535116 ADAPTER AS

Buy ADAPTER AS 3535116 Caterpillar genuine, new aftermarket tractor parts with delivery
INDUSTRIAL ENGINE, PETROLEUM PACKAGE,

Compatible equipment models: 3535116:

INDUSTRIAL ENGINE  C15   C18  
PETROLEUM ENGINE  C15   C18  
PETROLEUM PACKAGE  CX31-C18I   Caterpillar
Number on catalog scheme: 5
 
  For full view, you need register

Information:

"Engine Serial Number"
Program the "Engine Serial Number" to match the engine serial number that is stamped on the engine information plate. The engine serial number is not preprogrammed on a replacement ECM."FLS" (Full Load Setting)
"FLS" is a number that represents the adjustment to the fuel system that was made at the factory in order to fine-tune the fuel system. The correct value for this parameter is stamped on the engine information plate. Only change this value if the engine is rerated or if a new ECM is installed. The parameter allows one time of programming without a factory password. In order to change the "FLS" after the initial programming, factory passwords are required."FTS" (Full Torque Setting)
"FTS" is similar to "FLS". Only change this value if the engine is rerated or if a new ECM is installed. Factory passwords are required. A new ECM or a blank ECM allows one time of programming of the "FTS" without the use of factory passwords. In order to change the "FTS" after the initial programming, factory passwords are required."Engine Cooling Fan Map"
This parameter allows the selection of a standard cooling package or a high ambient cooling package."Engine Warmup Elevated Idle"
The "Engine Warmup Elevated Idle" parameter allows the operation of this feature to be enabled or disabled."Ether Solenoid Configuration"
The parameter for the "Ether Solenoid Configuration" allows the ether solenoid to be installed or not installed."Number of Available Engine Power Levels"
This parameter selects the engine power level. This parameter allows the selection of a different engine power level without reflashing the engine software. In order to change the engine power level after the initial programming, factory passwords are required."Security System Immobilizer Installation Status"
The "Security System Immobilizer Installation Status" allows the "security system immobilizer" to be installed or not installed."Injector Trim File"
This parameter is for the injector trim files that are associated with each injector. If an injector is replaced or if two injectors are exchanged between cylinders, the injector trim file for the injector must be programmed to the correct cylinder.Parameter Table
Table 2
Customer Specified Parameters    
Parameter    Available Range or Options    Default    Required Password    
"Product ID"     8 characters     blank     none    
"Equipment ID"     17 characters     blank     none    
"Engine Serial Number"     8 characters     blank     none    
"FLS"     -128 to +127     0     Factory    
"FTS"     -128 to +127     0     Factory    
"Engine Cooling Fan Map"     "Standard" or "High Ambient"     "Standard"     none    
"Engine Warmup Elevated Idle"     "Enabled" or "Disabled"     "Enabled"     none    
"Ether Solenoid Configuration"     "Not Installed" or "Continuous Flow Solenoid"     "Continuous Flow Solenoid"     none    
"Number of Available Engine Power Levels"     4 or 8 (1)     4     Factory    
"Security System Immobilizer Installation Status"     "Installed" or "Not Installed"     "Not Installed"     none    
( 1 ) Option 4 is for Standard VHP, option 8 is for VHP PlusParameter Worksheet
Record the following information

Caterpillar parts catalog:

Caterpillar parts catalog
C15 Industrial Engine LDN00001-UP
C18 Industrial Engine BDN00001-UP
C15 Petroleum Engine MG200001-UP
C18 Petroleum Engine BE200001-UP
C18 Industrial Engine N8F00001-UP


Parts adapter Caterpillar catalog:

3845175 ADAPTER
C13, C15, C18, C9.3, CX31-C18I
3798571 ADAPTER
C13, C15, C18, C9.3, CX31-C18I
3353979 ADAPTER AS
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 797F, CX31-C13I, CX31-C15I, CX31-C18I
3668977 ADAPTER AS
CX35-P800, TH48-E70
3522730 ADAPTER-FAN
C13, C9.3, CX31-C13I
3522728 ADAPTER-FAN
C13, C9.3, CX31-C13I
3522726 ADAPTER-FAN
C13, C9.3, CX31-C13I
3510500 ADAPTER-FAN
C13, C9.3, CX31-C13I
3472185 ADAPTER
C13, CX31-C13I
3535117 ADAPTER AS
C15, C18, CX31-C13I, CX31-C18I
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.