AVSPARE.COM
parts catalog

ADAPTER GP-CRANKSHAFT 3843655 - Caterpillar


3843655 ADAPTER GP-CRANKSHAFT Caterpillar parts 3512B, 3512C, 3516C
Rating:
22
Alternative (cross code) number:
CA3843655
384-3655
3843655
Caterpillar 3843655 ADAPTER GP-CRANKSHAFT

Buy ADAPTER GP-CRANKSHAFT 3843655 Caterpillar genuine, new aftermarket tractor parts with delivery
PETROLEUM ENGINE,

Compatible equipment models: 3843655:

PETROLEUM ENGINE  3512B   3512C   3516C   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


Illustration 1 g01819236
Connections of the Cat Data Link
This diagnostic code is associated with the communication between the Transmission ECM and the monitoring system that is conducted over the Cat Data Link. The FMI 09 diagnostic code means that the Transmission ECM has lost communication with the Monitoring System. The possible causes of this diagnostic code are listed below:
An open connection exists in the circuit for the Cat Data Link.
The monitoring system has failed. This is unlikely.
The ECM has failed. This is unlikely.Note: If the monitoring system is not operating correctly, refer to Troubleshooting, KENR9022 for information on troubleshooting the monitoring system. Ensure that the diagnostic code is active before performing this procedure. Check the monitoring system for correct operation before performing this procedure.Note: Each connector contact should withstand 45 N (10 lb) of pull. Each wire should remain in the connector body. This test checks whether the wire was properly crimped in the contact and whether the contact was properly inserted into the connector. Test Step 1. CHECK THE DATA LINK CIRCUIT FOR AN OPEN.
Turn the key start switch and the disconnect switch to the OFF position.
Disconnect the connector of the machine harness J1 from the Transmission ECM. Disconnect the machine harness connector from the monitoring system.
Inspect the harness connectors and clean all of the contacts of the harness connectors. Refer to the illustration above in order to check the connection of the Cat Data Link on each of the machine harness connectors. Ensure that the wires are secured in the connector and in good condition.
At the disconnected harness connectors, measure the resistance from the contact of ECM connector J1-10 (wire 893-GN(Green)) to contact J1-8 (wire 893-GN(Green)) of the "VIMS MAIN" ECM and contact J1-8 (wire 893-GN(Green)) of the Advisor.
At the disconnected harness connectors, measure the resistance from contact J1-20 (wire 892-BR(Brown)) of the Transmission ECM to contact J1-9 (wire 892-BR(Brown)) of the "VIMS MAIN" ECM and J1-9 (wire 892-BR(Brown)) of the Advisor. Expected Result:Both of the resistance measurements are less than 5 ohms.Results:
OK - Both of the resistance measurements are less than 5 ohms. The Cat Data Link circuit in the machine harness is not open. Proceed to Test Step 2.
NOT OK - At least one of the resistance measurements is more than 5 ohms.Repair: There is an open or a bad connection in the Cat Data Link circuit in the machine harness. Refer to the complete Electrical System Schematic of the machine. Locate all the connectors and examine all of the connectors of the machine harness that are involved in the data link circuit. Check each wire that is involved in the circuit for an open or a bad connection. Ensure that all connections are clean, that all connections are secure and that all connections are in good condition. Repair the machine harness or replace the machine harness.STOPTest Step 2. CHECK IF THE DIAGNOSTIC CODE REMAINS.
Inspect the harness connectors. Clean the contacts of the harness connectors and check the wires for damage to the insulation that is


Parts adapter Caterpillar catalog:

5P9617 ADAPTER
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H NA, 12K, 12M, 135H, 135H NA, 140G, 140H, 140H NA, 140K, 140K 2, 140M, 143H, 14H, 160H, 160K, 163H, 16H, 16M, 215D, 225, 225D, 229, 229D, 231D, 235,...
9X0262 ADAPTER
120H, 120K, 120K 2, 12H, 12K, 12M, 135H, 140G, 140H, 140K, 140K 2, 140M, 140M 2, 143H, 14H, 14M, 160H, 160K, 160M, 160M 2, 163H, 16H, 16M, 2290, 2390, 2391, 2491, 24H, 24M, 2590, 30/30, 3114, 3116, 31...
8T2353 ADAPTER
120G, 120H, 120K, 120K 2, 12G, 12H, 12H NA, 12K, 12M, 12M 2, 130G, 135H, 140G, 140H, 140H NA, 140K, 140K 2, 140M, 140M 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160K, 160M 2, 163H, 16G, 216, 228, 2290, 2...
6V7420 ADAPTER
120G, 120H, 120K, 120K 2, 12K, 135H, 140K, 140K 2, 143H, 14H, 160K, 163H NA, 16G, 16M, 216, 236, 247, 267, 287, 305.5, 308D, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 32...
7D4903 ADAPTER
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16...
6I0724 ADAPTER-PLUG
324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330C, 330C FM, 330C L, 330C MH, 330...
2R8613 ADAPTER-HOSE
3406B, 3406C, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 518, 518C, 55, 561D, 571G, 572G, 589, 814F, 815F, 816F, 966F II, CB-22, D10, D4E SR, D5, D5B, D5E, D5H, D5HTSK II, D6C, D6D, D...
7C7683 ADAPTER-FUEL MANIFOLD
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 797, 797B, ...
1361495 ADAPTER AS
3512B, 3516, 3516B, 3516C, G3516
2094458 ADAPTER
3512B, 3516, 3516B, 3516C, G3516
9Y3188 ADAPTER-SUPPLY
3512C, G3508, G3508B, G3512, G3512B, G3516, G3516B, G3520B
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.