AFTERCOOLER AS 3599393 - Caterpillar

Table 1
Example of a Topic and Symptoms    
Item     Example     Locations    
Topic     Transmission Clutch Troubleshooting     Listed in the table of contents    
Listed in the index
Symptoms     The Transmission Clutch Is Engaged and the Clutch Does Not Release.     Listed in the index under the corresponding topic    
The Transmission Clutch Does Not Engage. Listed after the topic in the troubleshooting section    
Procedures         Located after the symptoms in the troubleshooting section    Troubleshooting can be complicated. A problem may be caused by one component. A problem may be caused by the relation of one component with other components. Not all possible problems and corrections can be included in the list of procedures for troubleshooting. Consultation with other technical personnel may be necessary in the process of troubleshooting.Service personnel must find the source of the problem. Then, complete the necessary repairs.General Procedure
Know the Machine.Understand the operation of the machine. Know if the symptom is characteristic of normal operation or if the symptom is a problem.Read the systems operation information in order to understand the systems of the machine. You must understand the interaction of the machine systems.
Prepare the machine for troubleshooting.
Complete Testing and Adjusting, "Machine Preparation" in this module.
Complete Troubleshooting, "Visual Inspection" in this module.
Identify the Symptoms.You need to speak with the operator about the symptom.
Ask about the performance of the machine prior to the problem.
Determine the time of the first occurrence of the symptoms.
Determine the operating conditions at the time of the problem.
Ask the operator about the sequence of events prior to the problem. Determine the order of the occurrences.
Ask the operator about the steps that have been taken to troubleshoot the machine.
Check the history of repairs of the machine.
Ask about the preventive maintenance of the machine.Inspect the machine. Look for problems. Notice any unusual odors in the air. Listen for unusual noises.
Check the component data display mode.The component data display mode will show the values of the data that are received by the electronic control module (ECM) or the values that are sent by the ECM. The components include sensors, switches, etc. Each of the components is referenced by a unique CID (component identifier).The required tools, procedures, and CID descriptions are provided in the following reference.ReferenceRefer to "Accessing Calibration And Display Modes of The Monitoring System" under "System Calibrations" in Service Manual, RENR9867, "Machine Electronic Control System".
Troubleshoot the faults with the service codes. Determine if the ECM has detected any faults. A service code is used to specify each detected fault. The methods for determining the active service codes are listed.
"Using The Caterpillar Monitoring System To Determine Service Codes"
"Using Caterpillar Electronic Technician (ET) To Determine Service Codes"The procedures for determining the service codes and the procedures for troubleshooting the machine are located in the following reference.ReferenceRefer to "Troubleshooting Faults With Service Codes" in Service Manual, RENR9867, "Machine Electronic Control System".
Troubleshoot using the description of the symptom.If you troubleshoot the service codes and the problem is not