AVSPARE.COM
parts catalog

AIR CLEANER GP 4645880 - Caterpillar



4645880 AIR CLEANER GP Caterpillar parts AIR
Rating:
16
Alternative (cross code) number:
CA4645880
464-5880
4645880
Caterpillar 4645880 AIR CLEANER GP
Weight: 10 pounds 4 kg.

Buy AIR CLEANER GP 4645880 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 5
 
  For full view, you need register

Information:


Illustration 1 g00489505
Typical example of a three-piece exhaust manifoldSix cylinder exhaust manifold is shown.Use the following procedure to assemble the three-piece exhaust manifold to the cylinder block.
Remove excess sealant from the exhaust manifold after assembly. Excess sealant left inside the exhaust manifold may damage the turbocharger.
Coat the inside diameter of the female ends of the manifold with engine oil.
Apply a thin coat of 2P-2333 High Temperature Sealer to the outside diameter of the male ends. Do not apply sealer at the tip of the male ends. Remove excess sealer from the assembled joints.
Apply 5P-3931 Anti-Seize Compound to the threads of bolt (1) through bolt (12) .
Tighten bolt (1) through bolt (12) in a numerical sequence.Tighten the bolts to the following torque. ... 4 1 N m (35 9 lb in)
Tighten bolt (1) through bolt (12) in a numerical sequence.Tighten the bolts to the following torque. ... 45 5 N m (33 4 lb ft)
Bend tabs (13) over the flats of the twelve bolt heads. This will lock the bolts in position.
Tighten studs (14) to a torque of 35 5 N m (26 4 lb ft).
Illustration 2 g00441404
Typical example of a one-piece exhaust manifoldSix cylinder exhaust manifold is shown.To assemble the one-piece exhaust manifold to the cylinder block, use step 3 through step 7 of the preceding procedure.
Illustration 3 g00586945
Typical example of a one-piece exhaust manifoldFour cylinder exhaust manifold is shown.Use the following procedure to assemble the one-piece exhaust manifold to the cylinder block.
Apply 5P-3931 Anti-Seize Compound to the threads of bolt (1) through bolt (8) .
Tighten bolt (1) through bolt (8) in a numerical sequence.Tighten the bolts to the following torque. ... 4 1 N m (35 9 lb in)
Tighten bolt (1) through bolt (8) in a numerical sequence.Tighten the bolts to the following torque. ... 45 5 N m (33 4 lb ft)
Bend tabs (9) over the flats of the eight bolt heads. This will lock the bolts in position.
Tighten studs (10) to a torque of 35 5 N m (26 4 lb ft).
Illustration 4 g00586930
Typical example of a water cooled exhaust manifoldSix cylinder exhaust manifold is shown.Use the following procedure to assemble the one-piece exhaust manifold to the cylinder block.
Apply 5P-3931 Anti-Seize Compound to the threads of bolt (1) through bolt (12) .
Tighten bolt (1) through bolt (12) in a numerical sequence.Tighten the bolts to the following torque. ... 4 1 N m (35 9 lb in)
Tighten bolt (1) through bolt (12) in a numerical sequence.Tighten the bolts to the following torque. ... 55 5 N m (41 4 lb ft)
Tighten studs (13) to a torque of 35 5 N m (26 4 lb ft).

Caterpillar parts catalog:

Caterpillar parts catalog
910M Compact Wheel Loader H2200001-UP (MACHINE) POWERED BY C4.4 Engine
910K Compact Wheel Loader L2200001-UP (MACHINE) POWERED BY C4.4 Engine
914M Compact Wheel Loader H2400001-UP (MACHINE) POWERED BY C4.4 Engine
914K Compact Wheel Loader L2400001-UP (MACHINE) POWERED BY C4.4 Engine
918M Compact Wheel Loader H2600001-UP (MACHINE) POWERED BY C4.4 Engine
920K Compact Wheel Loader B9800001-UP (MACHINE) POWERED BY C4.4B Engine
914K Compact Wheel Loader BF400001-UP (MACHINE) POWERED BY C4.4B Engine


Parts air Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.