parts catalog

ANGLE 3156853 - Caterpillar

3156853 ANGLE Caterpillar parts ANGLE
Alternative (cross code) number:
Caterpillar 3156853 ANGLE

Buy ANGLE 3156853 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 4C-5599 Anti-Seize Compound 1
B - Loctite 242 1
Illustration 1 g02477404
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install shaft (17), roll pin (18), and snap ring (16) to mounting block assembly (15).
Illustration 2 g02477431
Install plate (13) and bolts (14) to the mounting block assembly. Apply Tooling (A) to shaft (17). Note: Note the orientation of the hole patterns in relation to the woodruff key.
Illustration 3 g02477398
Install spacer (12) and snap ring (11). Apply Tooling (A) to spacer (12).
Illustration 4 g02477375
Install spring (10) and woodruff key (9).
Illustration 5 g02477339
Twist spring (8) and install torque arm (7). Apply Tooling (A) to torque arm (7).
Illustration 6 g02477338
Install tubes (5), plate (6), the washers, and bolts (4). Note: Bolts (4) should not protrude beyond plate (6).
Illustration 7 g02476631
Install O-ring seal (3) to position sensor (1).
Illustration 8 g02477319
Apply Tooling (B) to bolts (2). Install position sensor (1) and bolts (2). Tighten bolts (2) to a torque of 1.0 .25 N m (9 2 lb in). Note: Position sensor (1) should be adjusted so that the mark on the sensor dial is aligned with the mark on the housing.End By:
Install the steering control. Refer to Disassembly and Assembly, "Steering Control - Install".

Parts angle Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.