ARM-SPRING RIG 4644965 - Caterpillar

Sensor Calibration
"Sensor Calibration" is not supported for the Track-Type Tractor.Diagnostics
The diagnostics menu allows you to choose from the diagnostic items that are listed below.
"Test valves"
"Hour Meter"
"Software Versions"
"Sensor Data"
"Fault History"
"Machine Voltage"
"Test Control Box"In order to enter the "Diagnostics" menu, complete the procedure that is listed here:
Press the Menu key.
Press the Arrow keys until "Diagnostics" is highlighted on the LCD.
Press the "OK/right reset" key. A screen that is similar to Illustration 22 appears.
Illustration 22 g01300151
Press the Arrow keys in order to select a diagnostics menu item to access.Test Valves
Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact your Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Once the system is placed in automatic mode, blade movement may occur.Ensure that all personnel are clear of the blade before you place the system in automatic mode.Personal injury or death from crushing could occur.
The "Test Valves" menu allows the hydraulic control valves to be driven manually in order to verify correct operation of the display, and the hydraulic control valve. In order to access the "Test Valves" menu, perform the procedure that is listed here:
Illustration 23 g01309688
Hour Meter
The "Hour Meter" menu shows the length of time that the Display has been operating. The "Hour Meter" menu also shows the length of time that the automatic controls have been used with the display.
Illustration 24 g01311065
Software Versions
The "Software Versions" menu identifies which AccuGrade - Laser System components are currently being used. The "Software Versions" menu also shows the versions of software that are loaded into the AccuGrade - Laser System components.
Illustration 25 g01311070
"Software Versions" MenuSensor Data
Use the "Sensor Data" menu in order to view the current sensor data that is generated by the system.
Illustration 26 g01370379
Fault History
The "Fault History" menu shows the AccuGrade - Laser System faults.Note: The last five faults are stored. These faults can be retrieved even if power to the system is lost.
Illustration 27 g01311075
Machine Voltage
The "Machine Voltage" menu shows the system voltage.
Illustration 28 g01311086
Test Box Control
The "Test Control Box" menu allows you to test the switches that are configured in the display for proper operation. The "Test Control Box" menu also allows you to test the display for proper operation. The keys that are available for testing include the keys on the display and the remote switches. All keys are available for testing except for the "ESC/left reset" key, and the "OK/right reset" key.
Illustration 29 g01300173