AVSPARE.COM
parts catalog

BALANCE PLATE 1C3796 - Caterpillar



1C3796 BALANCE PLATE Caterpillar parts BALANCE
Rating:
56
Alternative (cross code) number:
CA1C3796
1C-3796
1C3796
Caterpillar 1C3796 BALANCE PLATE
Weight: 0.09 pounds 0 kg.

Buy BALANCE PLATE 1C3796 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Keep the engine speed low until the engine oil pressure indicator light goes out. If the light does not go out within 10 seconds, stop the engine and investigate the cause before starting the engine again. Failure to do so, can cause engine damage.
The hydraulic activation control lever must be in the UNLOCKED position, before the hydraulic controls will function. 1. Allow the engine to warm up at LOW IDLE for at least five minutes. Engage and disengage the implement controls. This will speed up the warm-up of the hydraulic components.When idling the engine for warm-up, observe the following recommendations:* In temperatures above 0°C (32°F), warm-up requires approximately 15 minutes.* In temperatures below 0°C (32°F), warm-up requires approximately 30 minutes.* In temperatures below - 18°C (0°F) or if hydraulic functions are sluggish, additional time may be required.2. To warm up the hydraulic oil, turn the engine speed dial to the medium engine speed. Move the stick in and out to its full stroke position. Do this operation for about five minutes.3. Place the power mode switch in Mode III position and turn the engine speed dial to the maximum engine speed. Run the engine for an additional five minutes while repeating the above stick in and stick out operation. This will allow the oil to warm up more rapidly.Cycle all of the controls to allow the warm oil to circulate through all of the cylinders and lines. 4. Observe the gauges and indicators frequently during the operation.


Parts balance Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.