AVSPARE.COM
parts catalog

BAR AS 4646182 - Caterpillar



4646182 BAR AS Caterpillar parts BAR
Rating:
66
Alternative (cross code) number:
CA4646182
464-6182
4646182
Caterpillar 4646182 BAR AS
Weight: 4 pounds 1 kg.

Buy BAR AS 4646182 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 7
 
  For full view, you need register

Information:


Illustration 5 g02333493
Hydraulic Control Inputs for "Relief Valve #2"
(HP) Hydraulic foot pedal
(B) Left Pedal (Forward)
(B) Right Pedal (Backward) - if equipped with medium pressure
Select a work tool that will allow for two-way flow from two pumps. The Variable Relief Valve #1 and #2 (Parameter #10 and #11) pressure setting must be set to 40000 kPa (5802 psi) for the work tool within the monitor.Reference: Refer to Testing and Adjusting, "Work Tool - Select" for the Tool Control System.Reference: Refer to Testing and Adjusting, "Work Tool Parameter - Program" for the Tool Control System.Monitor Procedure
The following procedure will allow the user to calibrate the variable relief valves using the monitor.
Enter "Service" from Setting menu. Input the password "9992".
Illustration 6 g06217675
Select "Calibrations" from the "Service" menu.
Illustration 7 g06217680
Select "Variable Relief Valves" from the "Calibrations" menu.
Illustration 8 g06217684
Select "Relief Valve #" for the appropriate valve from the "Variable Relief Valves" menu.
Press the OK key to start the calibration. The engine RPM will automatically increase to the equivalence of engine speed dial 7.
Confirm the notes on the monitor display. Set up the test conditions in accordance with the instructions. Press the OK key.Note: Refer to the previous Illustrations for the correct control input for the machine.
Press and hold the control input for activation of the work tool to the FULL ON position during the calibration.
If calibration was successful and no errors occurred, the display will indicate that the calibration is complete.
The "Error" screen will be displayed on the monitor if an error occurs. The process of calibration will not be saved and the process must be restarted.Cat Electronic Technician Procedure
The following procedure will allow the user to calibrate the variable relief valves using the Cat Electronic Technician.
Illustration 9 g06263318
Diagnostic connector for Cat Electronic Technician
(1) Service port
Connect the Cat Electronic Technician to the diagnostic connector located behind the seat on the left side of the cab.
Start Cat Electronic Technician.
Illustration 10 g06246627
Select the ECM for "Implement Control".
Illustration 11 g06246872
Select "Calibrations" from the "Service"menu.
Illustration 12 g06246976
Highlight "PRV - Variable Relief Pressure Calibration" and click the "Start" button in the lower left corner of the screen.
Illustration 13 g06246981
Select the variable relief valves to calibrate and press the "Begin" button.
Follow the instructions on the screen. Press "Next" button to continue through to the next step.
Press and hold the control input for activation of the work tool to the FULL ON position during the calibration.
If the calibration was successful and no errors occurred, the display will indicate that the calibration is complete. Press the "Finish" button to exit or move on to the next calibration.
If the calibration failed, the calibration is not saved. Press the "Restart" button to try the calibration again or press the "Finish" button to exit or move on to the next calibration.Test Procedure
Confirm the calibration using the following procedure.
Illustration 14 g06247214
Select "Diagnostic Tests" from the "Diagnostics" menu.
Illustration 15 g06247218
Highlight "Variable Relief Valve Pressure Test" and click the "Start" button in the lower left corner of the screen.
Select the test and press the "Begin" button.
Follow the instructions on the screen. Press "Start" button in the lower

Caterpillar parts catalog:

Caterpillar parts catalog
CB22B Compactor 2B200001-UP (MACHINE) POWERED BY C1.5 Engine
CB24B Compactor 2X400001-UP (MACHINE) POWERED BY C1.5 Engine
CC24B Compactor C2400001-UP (MACHINE) POWERED BY C1.5 Engine
CB32B Compactor 3H200001-UP (MACHINE) POWERED BY C1.5 Engine
CB34B Compactor 3B400001-UP (MACHINE) POWERED BY C2.2 Engine
CC34B Compactor CC300001-UP (MACHINE) POWERED BY C2.2 Engine
CB34B XW Compactor JTX00001-UP (MACHINE) POWERED BY C2.2 Engine
CB36B Compactor M3600001-UP (MACHINE) POWERED BY C2.2 Engine
CB2.5, CB2.7, CB2.9 Vibratory Utility Compactor R2B00001-UP (MACHINE) POWERED BY C1.5 Engine
CC2.6 Vibratory Utility Compactor SPX00001-UP (MACHINE) POWERED BY C1.5 Engine


Parts bar Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.