AVSPARE.COM
parts catalog

BAR-LH 9V9786 - Caterpillar



9V9786 BAR-LH Caterpillar parts 916 BAR
Rating:
8
Alternative (cross code) number:
CA9V9786
9V-9786
9V9786
Caterpillar 9V9786 BAR-LH
Weight: 16 pounds 7 kg.

Buy BAR-LH 9V9786 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 9V9786:

WHEEL LOADER  916   Caterpillar
Number on catalog scheme: 7
 
  For full view, you need register

Information:

Fore And Aft Slide Adjustment Procedure
1. Move the seat to the farthest rearward position, as in Illustration 1.
Illustration 1.
Front View of Seat in Farthest Rearward Position2. Loosen nut (1), as shown in Illustration 1, just enough to allow lateral movement of the adjustable slide rail (2).3. Move the seat to the farthest forward position, as in Illustration 2.
Illustration 2.
Rear View of Seat in Farthest Forward Position 4. Loosen bolts (5), (6), and (7) just enough to allow lateral movement of the adjustable slide rail (2). Nut (1), and bolts (5), (6), and (7) must all be loosened berfore continuing with the adjustment procedure.5. Using a hammer, tap the adjustable slide rail (2) towards the upper slide plate (3). Continue to tap the adjustable slide rail (2) until the slide block (4) is securely against the upper slide plate (3).6. Slightly tighten bolt (6).7. Return the seat to the farthest rearward position, as in Illustration 1.8. Using a hammer, tap the adjustable slide rail (2) towards the upper slide plate (3). Continue to tap the adjustable slide rail (2) until the slide block (4) is securely against the upper slide plate (3).9. Lightly tighten nut (1).10. Move the seat fully forward and rearward to test the adjustment. If excessive effort is required to slide the seat, using the hammer, tap the adjustable slide rail (2) away from the upper slide plate (3). If excessive side to side clearance is present, tap the adjustable slide rail (2) towards the upper slide plate (3).11. If necessary, repeat Step 10 until the seat will move easily from the forward to rearward positions with a minimum of side to side motion. Ensure that excessive clearance does not exist between the slide block (4) and the upper slide plate (3).12. Tighten nut (1) to a torque of 47 N m (34 lb ft).13. Tighten bolts (5), (6), and (7) to a torque of 47 N m (34 lb ft).

Caterpillar parts catalog:

Caterpillar parts catalog
916 WHEEL LOADER 2XB00001-UP (MACHINE) POWERED BY 3204 ENGINE
G916 WHEEL LOADER 5GD00001-00047 (MACHINE) POWERED BY 3204 ENGINE
916 WHEEL LOADER 9WB00001-UP (MACHINE) POWERED BY 3204 ENGINE
916 WHEEL LOADER 2XB00001-UP (MACHINE) POWERED BY 3204 ENGINE
G916 WHEEL LOADER 5GD00001-00047 (MACHINE) POWERED BY 3204 ENGINE
916 WHEEL LOADER 2XB00001-UP (MACHINE) POWERED BY 3204 ENGINE
916 WHEEL LOADER 5KC00001-UP (MACHINE) POWERED BY 3204 ENGINE


Parts bar Caterpillar catalog:

6W0751 BAR
916, 926, 926A, IT28
9V1021 BAR
926, 926A, 936, 936F, G936, IT28, IT28B
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.