AVSPARE.COM
parts catalog

BATTERY & WIRING GP 3535068 - Caterpillar



3535068 BATTERY & WIRING GP Caterpillar parts 980K, 980K HLG BATTERY
Rating:
69
Alternative (cross code) number:
CA3535068
353-5068
3535068
Caterpillar 3535068 BATTERY & WIRING GP

Buy BATTERY & WIRING GP 3535068 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 3535068:

WHEEL LOADER  980K   980K HLG   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:

Make reference to CYLINDER LINER PROJECTION in Testing and Adjusting for the complete procedure.1. Install gasket (10) and spacer plate (9) with bolts (1). Tighten bolts (1) evenly in four steps: 1st step ... 10 lb. ft.(14 N m)2nd step ... 25 lb. ft.(35 N m)3rd step ... 50 lb. ft.(70 N m)4th step ... 70 lb. ft.(95 N m)2. Install tooling as shown. Tighten bolts (4) evenly in four steps: 1st step ... 5 lb. ft.(7 N m)2nd step ... 15 lb. ft.(20 N m)3rd step ... 25 lb. ft.(35 N m)4th step ... 50 lb. ft.(70 N m)3. Measure cylinder liner projection with dial indicator (3) in 1P2402 Block (2) as shown. Measure at four places around each cylinder liner near the clamped area. Average of four projection measurements from any cylinder liner must be ... .0048 .0028 in.(0.122 0.071 mm)Maximum permissible difference between all four measurements ... .002 in.(0.05 mm)Maximum permissible difference between average projection of any two cylinder liners next to each other .002 in. (0.05 mm)4. Minimum permissible depth to machine counterbore to adjust cylinder liner projection ... .030 in.(0.76 mm) Maximum permissible depth to machine counterbore to adjust cylinder liner projection ... .045 in.(1.14 mm)Install a .030 in. (0.76 mm) shim plus any added shims necessary to get the correct cylinder liner projection. Be sure that the .030 in. (0.76 mm) shim is directly under the cylinder liner flange.Put 7M7260 Liquid Gasket on the top of the top shim and on the bottom of the bottom shim before installing.(5) 3H465 Plate.(6) Crossbar, from 8B7548 Push Puller.(7) 1P2396 Adapter Plate.(8) 3H465 Plate (installed with top side down).

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
980K Wheel Loader W7K00001-UP (MACHINE) POWERED BY C13 Engine
980K Wheel Loader GTZ00001-UP (MACHINE) POWERED BY C13 Engine
980K Wheel Loader High Lift Grapple NEP00001-UP (MACHINE) POWERED BY C13 Engine


Parts battery Caterpillar catalog:

9X3404 BATTERY
305.5E, 306E, 307, 307B, 307E, 308E, 311, 311B, 311C, 311D LRR, 312, 312B, 312C L, 312D, 312D L, 312D2, 313D, 314C, 314D CR, 314D LCR, 315, 315C, 315D L, 317, 318C, 318D2 L, 319C, 319D, 319D L, 319D L...
1535710 BATTERY GP
120K, 120K 2, 120M, 120M 2, 12H, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140H, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14H, 14H NA, 14M, 160H, 160H NA, 160K, 160M, 160M 2, 16...
3778080 BATTERY & WIRING GP
320D L, 320D2, 320D2 L, 323D L, 323D2 L
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.