0005611 BEARING Caterpillar parts BEARING
Alternative (cross code) number:
Weight: 0.21 pounds 0 kg.
Illustration 12 g00788460Note: Measure Dimension (X). Record the measurement for assembly purposes.
Loosen nut (36) and remove setscrew (35). Remove O-ring seal (37) and pin (38).
Illustration 13 g00788468
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove retaining ring (39), retainer (40), pin (41), and spring (42).
Illustration 14 g01051667
Remove bolts (43) and head assembly (44).
Illustration 15 g00829564
Remove control plate (45).
Illustration 16 g00788478
Remove set screw (46).
Illustration 17 g00788481
Remove pin (47) and piston (48).
Illustration 18 g01049553
Remove valves (51) and seats (49). Remove O-ring seals (50).
Illustration 19 g01051668
Remove dowels (51A) from housing (52) , if necessary. Remove O-ring seals (53).
Measure Dimension (X). Record the measurement for assembly purposes. Loosen nut (54). Remove socket setscrew (55).
Repeat Step 20 on the other side of the housing.
Illustration 20 g00789610
Use a soft faced hammer in order to remove rotating assembly (56).
Illustration 21 g00789618
Remove barrel assembly (57). Use Tooling (B) in order to protect the spline from damage during the disassembly and assembly procedure.
Illustration 22 g00789629
Remove spring (59) and shim (58).
Illustration 23 g00789639
Remove screws (60) and retainer plate (61). Remove piston assemblies (62) and center pin (63).
Illustration 24 g00789648Note: Shaft and bearing assembly (64) is not separately serviced.
Illustration 25 g00789678
Use Tooling (A) in order to remove retaining ring (65) and seal (66).