parts catalog

BEARING A 1C4185 - Caterpillar

1C4185 BEARING A Caterpillar parts BEARING
Alternative (cross code) number:
Caterpillar 1C4185 BEARING A
Weight: 3 pounds 1 kg.

Buy BEARING A 1C4185 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


There is no clearance for a person in the area between the front and rear frame when the machine is turned to either side. When a machine is to be lifted, transported on another machine, or service work is to be performed near the center of the machine, connect the steering frame lock link between the front and rear frames. This will keep the machine in a straight ahead position. Before operating the machine, be sure the steering frame lock link is disconnected, and put into the storage position.
1. Remove lockpin (1) and pin (2) that hold link (3) in the storage position steering frame lock.2. Move steering frame lock link (3) to the front frame, and install pin (2) and lockpin (1).3. To put the steering frame lock link in the storage position, do Steps 1 and 2 in the reverse order.

Parts bearing Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.