62024100716 BEARING SHELL UPPER 0.10MM Caterpillar parts
Rating:
Alternative (cross code) number:
CA62024100716
6202410-0716
62024100716
CA62024100716
6202410-0716
62024100716
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
ZZ 6V-9508 Face Seal Plug 6
6V-9829 Cap As 6 Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN THE PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Mark the location of all hose assemblies and fittings for assembly purpose.
Illustration 1 g00989470
Remove screws (1) .
Illustration 2 g00989471
Remove screws (2). Move bracket (3) out of the way.
Remove screws (4) .
Move cushion assembly (5) out of the way.
Illustration 3 g00989472
Disconnect harness assemblies (7). Remove cushion assembly (6) .
Illustration 4 g00989473
Remove cover (9) .
Remove screws (10) .
Move cover (8) out of the way.
Illustration 5 g00989474
Disconnect harness assembly (13). Loosen nut (12) .
Remove control handle (11) .
Remove bolts (14) .
Raise pilot valve (15) in order to access the hose assemblies.
Illustration 6 g00989475
Disconnect hose assemblies (16) .
Remove pilot valve (15) .
Table 1
Required Tools
Tool Part Number Part Description Qty
ZZ 6V-9508 Face Seal Plug 6
6V-9829 Cap As 6 Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN THE PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Mark the location of all hose assemblies and fittings for assembly purpose.
Illustration 1 g00989470
Remove screws (1) .
Illustration 2 g00989471
Remove screws (2). Move bracket (3) out of the way.
Remove screws (4) .
Move cushion assembly (5) out of the way.
Illustration 3 g00989472
Disconnect harness assemblies (7). Remove cushion assembly (6) .
Illustration 4 g00989473
Remove cover (9) .
Remove screws (10) .
Move cover (8) out of the way.
Illustration 5 g00989474
Disconnect harness assembly (13). Loosen nut (12) .
Remove control handle (11) .
Remove bolts (14) .
Raise pilot valve (15) in order to access the hose assemblies.
Illustration 6 g00989475
Disconnect hose assemblies (16) .
Remove pilot valve (15) .