63000392 BEARING, THRUST Caterpillar parts
CB-614
Rating:
Alternative (cross code) number:
CA63000392
6300-0392
63000392
CA63000392
6300-0392
63000392
VIBRATORY COMPACTOR,
Compatible equipment models: 63000392:
Number on catalog scheme:
27
For full view, you need register
Information:
Illustration 7 g00636164
Remove pin (16) from head (8) .
Remove piston rod (11) from head (8) .
Remove piston rod (14) from head (8) .
Use Tooling (A) in order to remove bearing cup (17) from head (8) .
Illustration 8 g00636166
Remove bearing (19). Remove shims (18) that are underneath the bearing. Remove plate (20) from the pump group. Remove two pins (Z) from the pump housing.
Illustration 9 g00636167
Remove four bolts (24). Remove two locking plates (23) and remove two spacer plates (22) from swashplate (21) .
Illustration 10 g00636168
Remove plug (25) from housing (3) .
Remove rotating group (26) and remove shim kit (27) from shaft (36) .
Illustration 11 g00636169
For assembly purposes, place identification marks on pistons (28). The position of the identification marks should correspond to the position of barrel (29) and plate (30). Remove piston assemblies (28) and remove plate (30) from barrel (29) .
Illustration 12 g00636170
Illustration 13 g00636171
Sudden release of spring force can cause injury.To prevent the possibility of injury, follow the procedure to relieve the spring pressure.
Use Tooling (D) and use a press in order to compress spring (33). Use Tool (B) in order to remove retaining ring (31) from barrel (29) .
Remove the following parts from barrel (29) : retaining ring (31), spacer (34), spring (33) and spacer (32) .
Illustration 14 g00636172
For assembly purposes, note the orientation of swashplate (21) to housing (3). Remove swashplate (21). Remove shaft (36) and bearing (35) from housing (3) .
Illustration 15 g00636173
Remove bearing (35) from shaft (36) .
Illustration 16 g00636175
Remove shield (37) from the housing.
Illustration 17 g00636176
Use Tooling (B) in order to remove retaining ring (38) from the housing. Remove lip seal (39) from the housing.
Illustration 18 g00636177
Remove two screws (42). Remove bearing (40) and remove bearing (41) from housing (3) .
Illustration 19 g00636178
Use Tooling (C) in order to remove roller bearing cup (43) from the housing.
Caterpillar parts catalog:
Parts bearing Caterpillar catalog:
3114, 3116, 3126, 3126B, 3176B, 3176C, 3196, 3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408C, 3412, 3412C, 3412D, 3412E, 446B, 446D, C-12, C15, C18, CB-614, CS-551, G3304, G3304...
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K...
16G, 245, 24H, 3406, 3406B, 3406C, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 5110B, 578, 589, 621E, 623E, 627E, 631D, 631E, 631G, 633E II, 637D, 637E, 637G, 651E, 657E, 769C, 769D, 771C, 771D, 77...
16G, 245, 24H, 3406, 3406B, 3406C, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 5110B, 578, 589, 621E, 623E, 627E, 631D, 631E, 631G, 633E II, 637D, 637E, 637G, 651E, 657E, 769C, 769D, 771C, 771D, 77...
1673C, 225, 3208, CB-614, CS-551, PS-500
120G, 12G, 130G, 140G, 1673C, 215, 225, 3208, 3304, 3306, 518, 613B, 613C, 637D, 920, 941, 950, 955L, 980B, CB-614, CS-551, D4D, D5, D5B, D6D, PR-1000, PS-500
16G, 16H NA, 245B, 3406, 3406B, 3406C, 3406E, 375, 375 L, 5080, 578, 621E, 621F, 623E, 627E, 627F, 826C, 980C, 980F, 980G, 980G II, C-15, CB-614, D350E II, D400E II, D8N, G3406, R2900, RR-250, SS-250
561H, 561M, 561N, 785D, 789D, 793D, 793F, CB-614, D350E, D350E II, D400E, D400E II, D40D
525, 525B, 525C, 525D, 535B, 535C, 535D, 545, 545C, 545D, 555D, 611, 615, 615C, 725, 725C, 730, 730C, 735, 740, CB-614, D250B, D250E, D250E II, D25C, D25D, D300B, D300D, D300E, D300E II, D30C, D350C, ...
0983050
BEARING
AP-800, CB-614, CS-551, PR-450C
AP-800, CB-614, CS-551, PR-450C
0775842
BEARING-FRONT
CB-614, CS-551, RR-250, SS-250
CB-614, CS-551, RR-250, SS-250
0775006
BEARING
CB-614
CB-614