AVSPARE.COM
parts catalog

BIT-END-RH 1247284 - Caterpillar



1247284 BIT-END-RH Caterpillar parts 834B BIT
Rating:
20
Alternative (cross code) number:
CA1247284
124-7284
1247284
Caterpillar 1247284 BIT-END-RH
Weight: 175 pounds 79 kg.

Buy BIT-END-RH 1247284 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL DOZER,

Compatible equipment models: 1247284:

WHEEL DOZER  834B   Caterpillar
  For full view, you need register

Information:


Illustration 25 g01401137
(6) Spindle Lubrication Oil Supply
Connect lube line (6) from the test bench to Tooling (G). Maintain an oil pressure of 275.8 kPa (40 psi).
Illustration 26 g01401141
(7) Torque Converter Inlet Pressure
Connect pressure gauge (7) to Tooling (N) .
Illustration 27 g01401144
(8) Torque Converter Outlet Relief Pressure
Connect pressure gauge (8) to Tooling (Q) .Test Procedure
Warm-up Procedure
If you are using SAE 10W oil, warm the oil to 50 °C (125 °F). If you are using Mobil DTE11 oil, warm the oil to 34 °C (95 °F). Maintain this temperature for the duration of the test.
Adjust the output flow at the No. 2 flow meter to 106.0 1.89 L/min (28 .5 US gpm).
Illustration 28 g02720621
Rotate the input shaft in a counterclockwise direction. Adjust the input rotation to 1600 20 rpm.
Maintain input speed, oil flow, and pressure for 5 minutes in order to purge the air from the system.Torque Converter Pressure And Leakage
Adjust the output flow at the No. 2 flow meter to 106.0 1.89 L/min (28 .5 US gpm).
Adjust the input rotation to 1600 20 rpm.
Record the torque converter inlet flow at the pressurized flow meter in Table 6.
Record the torque converter inlet pressure in Table 6.
Record the torque converter outlet relief pressure in Table 6.
To obtain the leakage, subtract the output flow from the input flow.
Record the calculation in Table 6.Contamination Control
Drain all oil from the torque converter.
Take an oil sample of the test bench oil supply. Oil contamination must be below ISO 16/13.
Record the results in Table 7.
Remove the torque converter from the test bench if the test bench oil supply is within specifications.Specifications
Table 4
General Specifications    
Input Speed     1600 20 rpm    
Torque Converter Outlet Flow    
106.0 1.89 L/min (28 .5 US gpm)    
Maximum Leakage    
17.0 L/min (4.5 US gpm)    
Torque Converter Inlet Pressure    
517.1 34.5 kPa (75 5 psi)    
Torque Converter Outlet Relief Pressure    
413.7 34.5 kPa (60 5 psi)    Torque Converter Bench Test Data Sheet
Table 5
CATERPILLAR     Torque Converter Bench Test Data Sheet     Test Date:    
Model:
Work Order:     Serial No.:    Torque Converter Leakage
Table 6
Torque Converter Leakage    
Input Speed     1600 20 rpm    
Inlet Flow (Torque Converter) (1)
    L/Min
(gpm)    
Outlet Flow (Torque Converter) (2)
    L/Min
(gpm)    
Leakage (3)
    L/Min
(gpm)    
Torque Converter Inlet Pressure     kPa
(psi)    
Torque Converter Outlet Relief Pressure     kPa
(psi)    
( 1 ) Measured at the pressurized flow meter
( 2 ) Measured at the No. 2 flow meter
( 3 ) Leakage = Converter Inlet Flow − Converter Outlet FlowContamination Control
Table 7
ISO Particle Count     Sample the test bench oil supply.
    ________/________Particle Count    
Table 8
______________________________________
Technician    
______________________________________
Supervisor    

Caterpillar parts catalog:

Caterpillar parts catalog
834B TRACTOR / POWER SHIFT / 92Z00001-UP (MACHINE) POWERED BY 3408 ENGINE
834B Wheel Tractor 7BR00001-UP (MACHINE) POWERED BY 3408E Engine


Parts bit Caterpillar catalog:

8E4546 BIT-END-LH
D11N, D11R, D11T
8E4545 BIT-END-RH
D11N, D11R, D11T
5J6928 BIT-END
7A, 814S, 824S, 826C, 8A
5J6927 BIT-END
7A, 814S, 824S, 826C, 8A
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.