AVSPARE.COM
parts catalog

BLADE GP-STR- 2278445 - Caterpillar



2278445 BLADE GP-STR- Caterpillar parts BLADE
Rating:
56
Alternative (cross code) number:
CA2278445
227-8445
2278445
Caterpillar 2278445 BLADE GP-STR-

Buy BLADE GP-STR- 2278445 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Parking Brake
Move the lever right to release the parking brake. Move the lever to the left to engage the parking brake.Service Brake
Service Brake Pedal - Push down the service brake pedal to stop or to slow the machine, and to keep the engine from overspeeding on a downgrade.Secondary Brake (Red Lever)
If the service brake pressure is lost, pull the lever down and hold to apply the secondary brake. Release the secondary brake lever and it will return to the OFF position. Hold the lever down until the machine stops.Retarder
The retarder cannot be used as a parking brake.
Pull the retarder lever down to apply the brakes. Push the lever up to release the brakes. The control lever position determines the amount of braking. The further down the control is pulled, the greater the braking effort.Accelerator
The accelerator pedal controls the fuel flow to the engine. The further the pedal is pushed to the floor, the higher the rpm.Elevated Low Idle Control
this controls the rpm's the operator wants to hold during long periods of working the machine in cold weather conditions. After the rpm is set with the accelerator, push the knob in to lock the accelerator in that rpm. Pull the knob to release.1. Start the engine. Engage the parking brake. Push in on the control knob. Check the rpm. It should be between 1250 and 1325 rpm.2. If the rpm falls within the range shown above, no further action is necessary. If the rpm is incorrect, an adjustment is necessary. For adjustment procedures, See Special Instruction SEHS9375, Installation of Elevated Low Idle Control. Look under the topic, Adjustment Procedure of elevated Low Idle Control.Engine Shutdown Handle (Normal shutdown is with key start switch)
Pull the handle out to stop the engine. After the engine stops, push the handle in. Use in emergencies only. The engine shutdown lever does not shut off the machine's electrical system.Remove the steering system pressure from the steering accumulator before doing any work on the machine.Turn the engine start switch key and the disconnect switch key to OFF. Remove the keys. (Remove the disconnect switch key only if the machine is to be parked for an extended period of time.)Turn the steering wheel right and left as far as possible in both directions, until the machine front wheels will not move. This discharges the pressure in the steering accumulators.Transmission Selector Lever
The transmission selector lever controls the forward, neutral or reverse transmission speeds.Shift into reverse only with the machine stopped.Tilt Steering
Pull the knob out and move the steering console back to the position desired. The console has five adjustable positions and is spring loaded to return forward when the knob is pulled out.


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.