AVSPARE.COM
parts catalog

BOLT 1C3803 - Caterpillar



1C3803 BOLT Caterpillar parts PR-1000, PR-450, PR-750B BOLT
Rating:
10
Alternative (cross code) number:
CA1C3803
1C-3803
1C3803
Caterpillar 1C3803 BOLT
Weight: 0.010 pounds 0 kg.

Buy BOLT 1C3803 Caterpillar genuine, new aftermarket tractor parts with delivery
COLD PLANER,

Compatible equipment models: 1C3803:

COLD PLANER  PR-1000   PR-450   PR-750B   Caterpillar
Number on catalog scheme: 10
 
  For full view, you need register

Information:

The hydraulic activation control lever must be in the UNLOCKED position, before the hydraulic controls will function.1. Allow the engine to warm up at LOW IDLE for at least five minutes. Engage and disengage the implement controls to help speed warm up of hydraulic components.When idling the engine for warm-up, observe the following recommendations:* In temperatures above 0°C (32°F), warm-up requires approximately 15 minutes.* In temperatures below 0°C (32°F), warm-up requires approximately 30 minutes.* In temperatures below -18°C (0°F) or if hydraulic functions are sluggish, more time may be required.
The hydraulic control valve may become overheated if the bucket is operated continuously under relief conditions.Operate the control valve for 10 to 15 seconds and then return the control lever to the HOLD position for five to ten seconds.
2. To warm up the hydraulic oil, turn the engine throttle switch to medium engine speed. Run the engine for about five minutes while intermittently modulating the bucket control lever with the bucket stalled (cylinder fully extended).3. Turn the engine throttle switch to the maximum engine speed. Run the engine for an additional five minutes while intermittently modulating the bucket control lever.This allows the oil to warm more rapidly.Cycle all controls to allow warm oil to circulate through all cylinders and lines.4. Observe the gauges and indicators frequently during the operation.

Caterpillar parts catalog:

Caterpillar parts catalog
PR-450 COLD PLANER 7DC00204-UP (MACHINE) POWERED BY 3408 ENGINE
PR-750B PAVEMENT PROFILER 8AC00001-UP (MACHINE) POWERED BY 3412 ENGINE
PR-1000 PAVEMENT PROFILER 5XC00001-00137 (MACHINE) POWERED BY 3208,3412 ENGINE
PR-450 COLD PLANER 7DC00204-UP (MACHINE) POWERED BY 3408 ENGINE


Parts bolt Caterpillar catalog:

0775722 BOLT
AP-200, CB-314, CS-551
0779136 BOLT
AP-200, CB-314
0812819 BOLT
CB-214B, CB-521, CB-534, CS-643, PS-300
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.