BOLT 62000038 - Caterpillar

Illustration 1 g01073657
Attach a suitable lifting device to ripper (1) with Tooling (F). The weight of ripper (1) is approximately 1400 kg (3088 lb). Raise ripper (1). Install suitable blocking under ripper (1). Lower ripper (1) on the blocking.
Illustration 2 g01073704
Remove bolts (2) .
Attach a suitable lifting device to link assembly (3). The weight of link assembly is approximately 30 kg (65 lb). Remove pins (4) and remove link assembly (3). Repeat this step for the opposite side.
Illustration 3 g01076555
Remove seals (3A) from link assembly (3). Repeat this step for the opposite end of the link. Repeat this step of the remaining link.Use Tooling (E) in order to remove bearing (3B). Repeat this step for the opposite end of the link. Repeat this step of the remaining link.
Illustration 4 g01073706
Attach Tooling (A) and a suitable lifting device to ripper (1). Raise ripper (1) and install Tooling (B) .
Illustration 5 g00933802
Remove bolt (5) and pin (6). Repeat this step for the opposite side. Remove ripper (1) .
Illustration 6 g01073710
Attach a suitable lifting device to link assembly (7). The weight of link assembly (7) is approximately 329 kg (725 lb).
Illustration 7 g01073747
Remove seals (7A) from link assembly (3). Use Tooling (D) to remove bearing (7B) from link assembly (3). Repeat this step for the remaining bearings.
Remove bolt (8) and remove pin (9). Repeat this step for the opposite side. Remove link assembly (7). Remove hose assemblies (10) .
Illustration 8 g01073719
Use Tooling (C) in order to support link assembly (11). The weight of link assembly (11) is approximately 102 kg (225 lb).
Use a prybar to move link assembly (11) to the side and lower on suitable blocking. Repeat this step for the opposite side.
Illustration 9 g01073729
Illustration 10 g01073734
Attach Tooling (F) and a suitable lifting device to plate assembly (12). The weight of plate assembly (12) is approximately 148 kg (325 lb). Remove bolts (13). Repeat this step for the opposite side.
Remove bolts (14). Repeat this step for the opposite side. Remove plate assembly (12) .
Illustration 11 g00933831
Install Tooling (C) under guard assembly (15). The weight of guard assembly (15) is approximately 147 kg (325 lb).
Remove pin (16). Repeat this step for the opposite side.
Remove bolts (17). Repeat this step for the opposite side.
Lower guard assembly (15) and move guard assembly (15) to the rear of the machine.
Illustration 12 g00936508
Attach a suitable lifting device to guard assembly (15). Remove guard assembly (15). Remove Tooling (C).
Illustration 13 g01073744
Attach a suitable lifting device to link assembly (11). The weight of link assembly (11) is approximately 102 kg (225 lb). Apply tension in order to support link assembly (11) .
Remove bolt (18) .
Drive pin (19) toward the tandem housing and remove link assembly (11) .