AVSPARE.COM
parts catalog

BRACE AS-TUBE 3156551 - Caterpillar



3156551 BRACE AS-TUBE Caterpillar parts BRACE
Rating:
56
Alternative (cross code) number:
CA3156551
315-6551
3156551
Caterpillar 3156551 BRACE AS-TUBE
Weight: 0.49 pounds 0 kg.

Buy BRACE AS-TUBE 3156551 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 180-3033 Stands 4
B 5P-3975 Rubber Lubricant 1
C 138-7575 Link Bracket 1 Start By:
Remove the tow arm. Refer to Disassembly and Assembly, "Tow Arm - Remove and Install".
Personal injury or death can result from servicing the drive belt.The tractor must be on a hard, level surface before the drive belt is removed or personal injury or death could occur.
Illustration 1 g02471458
Remove bolt (2), bolt (3), and support assembly (1).
Illustration 2 g01070487
Raise the machine and install Tooling (A) under the machine, as shown.
Purge the track tension system. Refer to Testing and Adjusting, "Accumulator - Test and Charge" in order to release the hydraulic oil pressure in the accumulator.
Install suitable blocks under belt (4) in order to support the belt.
If necessary, apply Tooling (B) in order to aid in the removal of tire assembly (5) from belt (4). Remove nuts (6). Attach a suitable lifting device to tire assembly (5) and remove tire assembly (5). The weight of tire assembly (5) is approximately 51 kg (112 lb).
Illustration 3 g01070488
A typical example
Remove nuts (7). Apply Tooling (B) to belt (4) and tire assembly (8) in order to aid in the removal of tire assembly (8) from belt (4).
Illustration 4 g01070492
A typical example
Attach Tooling (C) and a suitable lifting device to tire assembly (8). Remove tire assembly (8) from belt (4). The weight of tire assembly (8) is approximately 110 kg (242 lb).
Illustration 5 g01128532
A typical example
Use a suitable lift truck and remove the suitable blocks from belt (4). Use a suitable lift truck and remove belt (4) from the machine. The weight of belt (4) is approximately 299 kg (660 lb).


Parts brace Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.