BRACKET AS 1245961 - Caterpillar

Illustration 1 g01297987
"Digital" window (2) in Illustration 1 displays the following information:
"Cut or Fill"
"Slope"The background color of the "Digital" windows can be configured in order to indicate the following information:
The quality of the position
The material that is being loaded
The Cut or Fill that is required
The "Dig State"Color Functions
"Digital" windows can be configured with color coded backgrounds. A list of information options is available in the window configuration. The background color of the window is controlled by the state of the selected information. The following tables explain the meaning of the background colors of windows for the different information options.Quality of the Position Accuracy
Table 1 shows the color code for a Digital window that uses the quality of the GPS position for the background color. An audible signal buzzer can be configured to sound when the accuracy of the position is low. The Low Accuracy Grade Alarm key must be set.$ Low Accuracy Grade Alarm - This configuration key sounds the "Low Accuracy Grade" alarm when the position mode is any mode other than high accuracy.ReferenceFor information on setting this key, refer to Systems Operation, KENR6338, "Machine Configuration File".
Table 1
Color    Description    
Green     High accuracy positioning    
Yellow     Medium accuracy positioning    
Magenta     Low accuracy positioning    
Red     Autonomous GPS solution. Position guidance will not be provided    
Gray/Charcoal     The position update from the GPS receiver is not changing. The data is old GPS data.    
Orange     There are no GPS position updates coming from the GPS receiver.    Cut or Fill
Table 2 shows the color code for a Digital window that uses the Cut or Fill information:
Table 2
Color     Description    
Green     The ground at the blade is within tolerance of grade.    
Red     The ground at the blade is above grade. The number indicates the amount of material to cut.    
Blue     The Ground at the blade is below grade. The number indicates the amount of material to fill.    The Dig State
Table 3 shows a window configured to use the Dig state. Digging is triggered either by a manual switch or by pressure sensors in the hydraulic line.
Table 3
Color     Description    
Green     The bucket is digging.    
Yellow     The bucket is not digging.