BRACKET 1246338 - Caterpillar

To adjust the brightness, perform the following procedure:
Press the button for adjusting the brightness (7) to enable the adjustment for brightness. The red LED light that is above the button and to the right of the button for adjusting the brightness will illuminate to indicate that you have entered the mode for adjusting the brightness.
Press the "Minus" button (9) or the "Plus" button (10) to adjust the brightness level.
Press any other button on the display to exit the mode for adjusting the brightness. The red LED light that is above the button and to the right of button for adjusting the brightness will turn OFF.The display may appear white in an area that is lighted if the following conditions exist:
The level for brightness is high.
The automatic brightness is not enabled.Adjustment for Contrast
To adjust the contrast, perform the following procedure:
Press the button for adjusting the contrast (6) to enable adjustment for contrast. The red LED light that is above the button and to the right of the button for adjusting the contrast will illuminate to indicate that you have entered the mode for adjusting the contrast.
Press the "Minus" button (9) or the "Plus" button (10) to adjust the contrast level.
Press any other button on the display to exit the mode for adjusting the contrast. The red LED light that is above the button and to the right of the button for adjusting the contrast will turn OFF.Automatic Brightness ON/OFF
To enable the option for automatic brightness, perform the following procedure:
Press the button for automatic brightness (5). The red LED light that is above the button and to the right of the button for automatic brightness will illuminate to indicate that the option for auto brightness or the dimming option is enabled.
Press the button for automatic brightness again to disable the option for automatic brightness. The red LED light that is above the button and to the right of the button for automatic brightness will turn off to indicate that the option for automatic brightness or the dimming option is disabled.Standby ON/OFF
To enable the Standby ON/OFF option, perform the following procedure:
Press the standby button (11) to enable standby. The red LED light that is above the button and to the right of the button for the standby option will illuminate to indicate that standby is enabled. The display should go dark. The display will remain dark until an input for the system is activated.
Press the standby button again to disable the standby option. The red LED light that is above the button and to the right of the button for the standby option will turn OFF. The display will remain in the ON position.Multiple Camera System
In MANUAL mode, camera views are not activated based on machine operation, therefore, the view that is displayed may not be the view that is normally shown. AUTOMATIC mode is recommended for machine operation in order to display the intended view for machine operation.
Note: The display can store settings for as many as three cameras.Brightness and