1695315 BRACKET AS Caterpillar parts G112, G320, MP15, S305, VHS-50, VRG30, VT50 BRACKET
Rating:
Alternative (cross code) number:
CA1695315
169-5315
1695315
CA1695315
169-5315
1695315
GRAPPLE-DEM/SORT, SHEAR-DEMOLITION/SCRAP,
Compatible equipment models: 1695315:
Number on catalog scheme:
1
For full view, you need register
Information:
Introduction
The current 3N-5736 Pre-Alarm Light has been discontinued by the supplier and replaced with a different version. As a result, the wiring for the replacement part will be different than the discontinued part.
Illustration One. Discontinued Version.
Illustration Two. New Version.The version of the part can be identified by looking at the connection pins located on the back of the part. Illustration One shows the electrical schematic and pin layout for the discontinued part. Illustration Two shows the electrical schematic and the pin layout for the new version.Installation
* The electrical wiring for the discontinued part shown in illustration One is as follows:1. Connect control panel wire No. 3 to 3N-5736 terminal No. 2.2. Connect control panel wire No. 51 to 3N-5736 terminal No. 4.* The electrical wiring for the new part shown in Illustration Two is as follows:1. Connect control panel wire No. 3 to 3N-5736 terminal No. 1.2. Connect control panel wire No. 51 to 3N-5736 terminal No. 4
The current 3N-5736 Pre-Alarm Light has been discontinued by the supplier and replaced with a different version. As a result, the wiring for the replacement part will be different than the discontinued part.
Illustration One. Discontinued Version.
Illustration Two. New Version.The version of the part can be identified by looking at the connection pins located on the back of the part. Illustration One shows the electrical schematic and pin layout for the discontinued part. Illustration Two shows the electrical schematic and the pin layout for the new version.Installation
* The electrical wiring for the discontinued part shown in illustration One is as follows:1. Connect control panel wire No. 3 to 3N-5736 terminal No. 2.2. Connect control panel wire No. 51 to 3N-5736 terminal No. 4.* The electrical wiring for the new part shown in Illustration Two is as follows:1. Connect control panel wire No. 3 to 3N-5736 terminal No. 1.2. Connect control panel wire No. 51 to 3N-5736 terminal No. 4
Caterpillar parts catalog:
Parts bracket Caterpillar catalog:
1753016
BRACKET AS
MP15, P360, S305, VHC-30, VHS-50, VT30, VT50
MP15, P360, S305, VHC-30, VHS-50, VT30, VT50
1753018
BRACKET AS
MP15, P115, P360, S305, VHC-30, VHS-50, VT30, VT50
MP15, P115, P360, S305, VHC-30, VHS-50, VT30, VT50
1750346
BRACKET AS
MP15, P360, S365B, VHC-30, VHS-60/3, VT30, VT50
MP15, P360, S365B, VHC-30, VHS-60/3, VT30, VT50
1750345
BRACKET AS
G320, MP15, P360, S305, VHC-30, VHS-50, VRG30, VT50
G320, MP15, P360, S305, VHC-30, VHS-50, VRG30, VT50
1695318
BRACKET AS
G112, G320, MP15, P215, P360, S305, VHC-30, VHP-30, VHS-50, VPG-25, VRG30, VT30, VT50
G112, G320, MP15, P215, P360, S305, VHC-30, VHP-30, VHS-50, VPG-25, VRG30, VT30, VT50
1750349
BRACKET AS
G320, G325B, MP15, P360, S305, VHC-30, VHS-50, VRG-40/2, VRG30, VT30, VT50
G320, G325B, MP15, P360, S305, VHC-30, VHS-50, VRG-40/2, VRG30, VT30, VT50
1939095
BRACKET AS
MP15, S305, S365B, S365C, VHS-50, VHS-60/3, VT50
MP15, S305, S365B, S365C, VHS-50, VHS-60/3, VT50
1887396
BRACKET AS
MP15, P360, VHC-30, VT30, VT50
MP15, P360, VHC-30, VT30, VT50
1887395
BRACKET AS
MP15, P360, VHC-30, VT30, VT50
MP15, P360, VHC-30, VT30, VT50
1905436
BRACKET AS
G112, G320, MP15, S365B, VPG-25, VRG30, VT50
G112, G320, MP15, S365B, VPG-25, VRG30, VT50
1904855
BRACKET AS
G112, MP15, VPG-25, VT50
G112, MP15, VPG-25, VT50
1890312
BRACKET AS
G112, MP15, S365B, VT50
G112, MP15, S365B, VT50