AVSPARE.COM
parts catalog

BRACKET 2H9132 - Caterpillar



2H9132 BRACKET Caterpillar parts D337 BRACKET
Rating:
84
Alternative (cross code) number:
CA2H9132
2H-9132
2H9132
Caterpillar 2H9132 BRACKET
Weight: 11 pounds 4 kg.

Buy BRACKET 2H9132 Caterpillar genuine, new aftermarket tractor parts with delivery
MARINE ENGINE,

Compatible equipment models: 2H9132:

MARINE ENGINE  D337   Caterpillar
Number on catalog scheme: None
 
  For full view, you need register

Information:

Start by: a. remove tilt cylinders (D3C)b. remove angling cylinder (D3C)c. remove angling blade group (D3C) 1. Remove guards (1), (2), (3) and (4) from the C-frame. 2. Remove two bolts (5) and clamp (6) on each side of the machine that hold the oil lines to the C-frame. 3. Pull oil lines (8) out of the C-frame. Disconnect oil lines (7). 4. Remove the bolts that hold clamps (9), (10) and (12) to the C-frame. Remove oil lines (11) from the C-frame. 5. Remove engine side panels (13) from the machine. Remove bolts (16) and retainers (15) that hold pins (14) for the rod end of the lift cylinders in the C-frame.6. Fasten a hoist to the lift cylinders. If necessary, use tool (A) and remove pin (14).7. Put a block of wood between the track and the frame and lower the lift cylinders on to the block of wood. 8. Fasten a hoist to the C-frame. Remove bolts (17) and retainers (18) that hold the C-frame to the frame.9. Remove pins (19). 10. Remove C-frame (20) from the machine. The weight is 390 Kg (855 lb.). The following steps are for installation of the C-frame.11. Fasten a hoist to the C-frame. Put C-frame (20) in position in the frame of the machine. 12. Install pins (19) that hold the C-frame to the frame. Install retainers (18) that hold the pins in place. Install bolts (17). 13. Fasten a hoist and put the rod end of lift cylinder in position in the C-frame. Install pins (14) that hold the rod end of the lift cylinders to the C-frame. Install retainers (15) and bolts (16) that hold pin (14) for the rod end of the lift cylinders in the C-frame.14. Install engine side panels (13) on each side of the machine. 15. Install oil lines (8). Connect oil lines (7). 16. Install clamps (6) and bolts (5) that hold the oil lines in place. 17. Put oil lines (11) in position on the C-frame. Install clamps (9), (10), and (12) that hold oil lines (11) in place on the C-frame. 18. Install guards (1), (2), (3) and (4) on the C-frame.End By: a. install angling blade group (D3C)b. install angling cylinder (D3C)c. install tilt cylinders (D3C)

Caterpillar parts catalog:

Caterpillar parts catalog
D337 MARINE ENGINE 23B00300-00455


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.