AVSPARE.COM
parts catalog

BRACKET GP-MOUNTING 3156748 - Caterpillar



3156748 BRACKET GP-MOUNTING Caterpillar parts 613G BRACKET
Rating:
65
Alternative (cross code) number:
CA3156748
315-6748
3156748
Caterpillar 3156748 BRACKET GP-MOUNTING

Buy BRACKET GP-MOUNTING 3156748 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL TRACTOR-SCRAPER,

Compatible equipment models: 3156748:

WHEEL TRACTOR-SCRAPER  613G   Caterpillar
  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-0333 Crowfoot Wrench 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01025581
Illustration 2 g01025630
Disconnect harness assembly (2) from injection actuation pressure control valve (1).
Remove nut (3), spacer (5), and solenoid valve (4) from injection actuation pressure control valve (1).
Use Tooling (A) and an extension in order to remove the injection actuation pressure control valve from the unit injector hydraulic pump.
Remove O-ring seals (6) and (8), and backup ring (7) from injection actuation pressure control valve (1). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 5P-0333 Crowfoot Wrench 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g01025630
Illustration 4 g01025581
Install new O-ring seals (6) and (8), and backup ring (7) on the injection actuation pressure control valve. Lubricate the O-ring seals with clean engine oil.
Use Tooling (A) in order to install the injection actuation pressure control valve on the unit injector hydraulic pump. Tighten the injection actuation pressure control valve to a torque of 50 5 N m (37 4 lb ft).
Install solenoid valve (4), spacer (5), and nut (3) on injection actuation pressure control valve (1). Tighten nut (3) to a torque of 5.5 1.5 N m (49 13 lb in).
Connect harness assembly (2) to injection actuation pressure control valve (1).

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
613G Wheel Tractor/ Scraper DBE00001-UP (MACHINE) POWERED BY C6.6 Engine


Parts bracket Caterpillar catalog:

7C1281 BRACKET
120M, 12M, 2470C, 3054, 3054B, 3054C, 3054E, 3056, 3056E, 307, 312, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 315, 315B L, 315C, 317, 318D2 L, 320D GC, 320D L, 320D2, 320D2 L, 323D L, 414E, 416B, 41...
3107918 BRACKET-SUPPORT
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
2776078 BRACKET
120M, 12M, 2470C, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 553C, 613G, 938H, 953D, 963D, C6.6, D5R LGP, D6K, D6K LGP, D6K XL, D6N, IT38H, PL61, R1300G II
2102262 BRACKET AS
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 143H, 14H, 14H NA, 14M, 160H, 160H ES, 160H...
2102263 BRACKET AS
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 143H, 14H, 14H NA, 14M, 160H, 160H ES, 160H...
1631149 BRACKET AS
613G, 621G, 621H, 621K, 623G, 623H, 623K, 623K LRC, 627G, 627H, 627K, 627K LRC, 631G, 637G, 657G, 725, 730, 735, 740, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 773F, 773G, 773G LRC, 773G OEM, 775F, 77...
1631148 BRACKET AS
613G, 621G, 621H, 621K, 623G, 623H, 623K, 623K LRC, 627G, 627H, 627K, 627K LRC, 631G, 637G, 657G, 725, 730, 735, 740, 769D, 770, 770G, 770G OEM, 771D, 772, 772G, 772G OEM, 773D, 773E, 773F, 773G, 773G...
4247743 BRACKET GP-MOUNTING
793F, 793F CMD, 793F OEM, 793F-XQ
4247742 BRACKET GP-MOUNTING
793F, 793F CMD, 793F OEM, 793F-XQ
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.