AVSPARE.COM
parts catalog

BRACKET-SUPPORT 3599638 - Caterpillar



3599638 BRACKET-SUPPORT Caterpillar parts G3408C BRACKET
Rating:
70
Alternative (cross code) number:
CA3599638
359-9638
3599638
Caterpillar 3599638 BRACKET-SUPPORT
Weight: 1 pounds 0 kg.

Buy BRACKET-SUPPORT 3599638 Caterpillar genuine, new aftermarket tractor parts with delivery
GAS ENGINE,

Compatible equipment models: 3599638:

GAS ENGINE  G3408C   Caterpillar
Number on catalog scheme: 16
 
  For full view, you need register

Information:

1. Have a first-aid kit handy. Use proper antiseptics on scratches, cuts, etc. immediately to avoid infection. LEARN WHERE TO GET PROPER MEDICAL SERVICE IF IT IS NEEDED. 2. Have a fire extinguisher handy, preferably mounted on the operator's platform. 3. Check to see that all personnel are clear of the machine before moving the machine. Sound the horn for several seconds to warn unobserved personnel and allow them time to clear the machine.4. Never operate the machine under load until it is thoroughly warmed up - especially important with hydraulically operated equipment. Erratic machine responses may occur when the hydraulic oil is cold.5. Lower the cutter SLOWLY when starting a cut, or the machine may ride up on the cutter and travel backwards some distance.6. DO NOT LET ANYONE STAND BEHIND THE MACHINE WHILE IT IS IN OPERATION. If the cutter hits a solid obstruction, the machine may jump backwards.7. Work slowly and carefully until you are accustomed to the machine, so that you will not get yourself into a situation you are not yet prepared to handle. 8. NEVER ALLOW A TRUCK TO HIT THE CONVEYOR. If a truck backs directly into the rear of the upper conveyor it can cause the conveyor structure or support members to fail immediately if the truck applies enough force. However, a seemingly minor contact by a truck can cause enough stress to start hairline cracks in the conveyor structure, support members and welds that will lead to a later failure.9. Do not let anyone ride anywhere on the machine, not even for short distances. They could fall under the cutter or tracks or onto the conveyor.10. Keep all personnel clear of the cutter, conveyors, and tracks when the engine is running. 11. If you must leave the machine unattended, lower the mainframe until the cutter is on the ground and shut the engine down. Be sure the travel control is at neutral and the parking brake on. 12. ALWAYS USE THE UPPER CONVEYOR SHIPPING SUPPORTS WHENEVER TRANSPORTING THE MACHINE. The high speed of operation and the heavy demand for the services of these machines lead to frequent transporting of the machines over highways and roads of varying quality. The normal bumping and rolling of the trailer causes high variable loads on the upper conveyor support, especially when travelling on rough roads. These high variable loads applied continuously over long transit times can cause fatigue cracks in the support welds and members that will cause structural failure at a later time. 13. Never show off, grandstand or engage in horseplay on the job. 14. Never use alcoholic beverages or illicit drugs on the job. Also, be careful of medicine, tranquilizers and other drugs that can cause sleepiness. The increased reaction time caused by any of these could cost your life. 15. Devote your full attention to the job. Even a slight distraction can be dangerous while operating a machine.16. Let only authorized and responsible persons operate the machine. No

Caterpillar parts catalog:

Caterpillar parts catalog
G3408C Natural Gas Engine Low Emission BAZ00001-UP


Parts bracket Caterpillar catalog:

9Y4384 BRACKET-SHAFT
16G, 16H NA, 245B, 3406, 3406B, 3406C, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 375, 375 L, 5080, 578, 583R, 587R, 589, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 631E, 637E, 651E, 657E, 769C, 771C, 773...
9Y4385 BRACKET AS
3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 631E, 637E, 651E, 657E, 769C, 771C, 773B, 775B, 834B, 988B, 988F, 990, 992C, 992D, CG137-08, CG137-12, D10N, D9R, G3408, G3408B, G3408C, G3412, G3412C, PM-...
1620589 BRACKET-END
3306B, 3406C, 3408, 3412, 3412C, 3412E, 3456, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C15, C175-16, C18, C27, C30, C32, C9, G3304, G3306, G3306B, G3406, G3408, G3408B, G3408C, G341...
1267492 BRACKET
3408, 3508, 3508B, 3512, 3512B, 3516, 3516B, C15, C18, C27, C32, G3304, G3306, G3406, G3408, G3408B, G3408C, G3412, G3508, G3512, G3516, PM3508, PM3512, SR4B
1059857 BRACKET-LIFTING
CG137-08, CG137-12, G3408, G3408C, G3412, G3412C
4P6716 BRACKET-SUPPORT
CG137-12, G3408, G3408B, G3408C, G3412, G3412C
1006900 BRACKET AS-CONTROL
G3408, G3408C, G3412, G3412C
2142430 BRACKET AS
G3408, G3408C, G3412, G3412C
1940889 BRACKET
G3408, G3408C, G3412, G3508, G3512, G3516
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.