BRACKET AS 3843693 - Caterpillar

Table 4
Contact Description J2 (1)    
No. (2)    Function    Type    
1     Shutoff Solenoid     Input    
3     Travel Speed Solenoid     Output    
4     PS Pressure PRV     Output    
6     Glow Plug Status     Input    
7     2 Way Lever Change Solenoid     Output    
8     Starter Relay     Output    
9     Flow Limit Press PRV     Output    
10     1Pump/2Pump Exchange Solenoid     Output    
16     Engine Speed Sensor-     Input    
17     Start Detection     Input    
18     Variable Relief-1 PRV     Output    
19     PRV Return     Ground    
20     PRV Return     Ground    
21     PRV Return     Ground    
23     Swing Brake Solenoid     Input    
25     Engine Speed +     Input    
27     Hydraulic Lock Lever Switch     Input    
28     Variable Relief-2 PRV     Input    
32     ATT Stem-1 Retract PRV     Input    
33     Glow Plug Relay     Output    
35     PRV Return     Ground    
38     ATT Stem - 1 Extend PRV     Input    
41     ATT Stem - 3 Retract PRV     Input    
42     ATT Stem - 3 Extend PRV     Input    
44     Engine Speed Command     Output    
50     CAN 1 (+) with Monitor & SW Panel     Input/Output    
51     CAN 1 (-) with Monitor & SW Panel     Input/Output    
53     Hydraulic Lock Solenoid     Input    
( 1 ) The ECM responds to an active input only when all the necessary conditions are satisfied.
( 2 ) The connector contacts that are not listed are not used.