BRACKET AS 4415935 - Caterpillar

Fan Drive Replacement Procedure
Table 1
Tools Needed    
Tool     Part
Number     Part
Description     Qty    
A     144-0235     Belt Tension Gauge     1    
Illustration 1 g02633452
(A) 22 mm (0.86 inch) (1) Jam nut
Loosen jam nut (1) with a 2 5/8 inch wrench in the counter-clockwise direction.
Illustration 2 g02633636
Loosen the adjustment bolt (2) in the counter-clockwise direction.
Remove the fan drive belt.
Install a new fan drive belt.
Turn the adjustment bolt in the clockwise direction until the belt is tensioned properly. Use Tooling (A) in order to check the belt tension. Refer to Table 2 for the belt specifications.
Table 2
Belt Size     Width
Belt Top Reference     Initial
Belt Tension (1)     Used
Belt Tension (2)    
15.24000 mm (0.6 inch)    
17.53 mm (0.69 inch)    
801 44 N (180 10 lb)    
378 44 (85 10)    
( 1 ) Tension for new belt
( 2 ) Belt with over 30 minutes of operation at rated speed
Use a suitable tool to tighten the jam nut.Adjustment Procedure
Table 3
Tools Needed    
Tool     Part
Number     Part
Description     Qty    
A     144-0235     Belt Tension Gauge     1    
Loosen the jam nut with a 2 5/8 inch wrench in the counter-clockwise direction.
Turn the adjustment bolt clockwise until the belt is tensioned properly. Use Tooling (A) in order to check the belt tension. Refer to Table 4 for the belt specifications.
Table 4
Belt Size     Width
Belt Top Reference     Initial
Belt Tension (1)     Used Belt Tension (2)    
15.24000 mm (0.6 inch)    
17.53 mm (0.69 inch)    
801 44 N (180 10 lb)    
378 44 (85 10)    
( 1 ) Tension for new belt
( 2 ) Belt with over 30 minutes of operation at rated speed
Use a suitable tool to tighten the jam nut.