AVSPARE.COM
parts catalog

BRACKET AS 4647435 - Caterpillar



4647435 BRACKET AS Caterpillar parts BRACKET
Rating:
31
Alternative (cross code) number:
CA4647435
464-7435
4647435
Caterpillar 4647435 BRACKET AS

Buy BRACKET AS 4647435 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 15
 
  For full view, you need register

Information:


Illustration 1 g00290542
Table 1
Piston and Rings
Description (1) Top ring (2) Intermediate ring (3) Oil control ring
Crown with single bolt
Width of groove in new piston 5.155 0.015 mm (0.203 0.001 inch) 5.155 0.015 mm (0.203 0.001 inch) 8.05 0.500 mm (0.317 0.020 inch)
Width of piston ring 4.965 0.025 mm (0.1955 0.0010 inch) 4.977 0.012 mm (0.1959 0.0005 inch) 7.976 0.011 mm (0.3140 0.0004)
Clearance between groove and piston ring 0.15 to 0.23 mm (0.006 to 0.009 inch) 0.15 to 0.205 mm (0.006 to 0.008 inch) 0.053 to 0.095 mm (0.002 to 0.004 inch)
End gap for the piston ring that is installed in 300 mm (11.8 inch) bore 1.50 0.20 mm (0.059 0.008 inch) 3.00 0.20 mm (0.118 0.008 inch) 1.10 0.20 mm (0.043 0.008 inch)
Crown with four bolts
Width of groove in new piston 5.160 0.010 mm (0.203 0.0004 inch) 5.160 0.010 mm (0.203 0.0004 inch) 8.05 0.500 mm (0.317 0.0197 inch)
Width of piston ring 4.965 0.025 mm (0.1955 0.0010 inch) 4.977 0.012 mm (0.1959 0.0005 inch) 7.976 0.011 mm (0.3140 0.0004)
Clearance between groove and piston ring 0.160 0.230 mm (0.0063 0.009 inch) 0.0161 0.205 mm (0.0006 0.008 inch) 0.053 to 0.095 mm (0.002 to 0.004 inch)
End gap for the piston ring that is installed in 300 mm (11.8 inch) bore 1.50 0.20 mm (0.059 0.008 inch) 3.00 0.20 mm (0.118 0.008 inch) 1.10 0.20 mm (0.043 0.008 inch)
Installation "UP-1"(1) "UP-2"(2) (3)
(1) The top ring must be installed with the "UP-1" mark toward the top of the piston.
(2) The intermediate ring must be installed with the "UP-2" mark toward the top of the piston.
(3) The oil control ring and the ring expander must be installed with the gaps 180 degrees across from each other. The white colored portion of the ring expander must be visible through the oil control ring gap.
Table 2
Piston
Crown with four bolts Crown with single bolt
Bore in piston for pin 120.040 0.015 mm (4.726 0.0006 inch)(1) 120.025 0.10 mm (4.725 0.004 inch)(2)
Diameter of pin 119.994 0.006 mm (4.724 0.0002 inch) 119.994 0.006 mm (4.724 0.0002 inch)
Clearance between piston pin and bore 0.040 to 0.067 mm (0.0016 to 0.0026 inch) 0.015 0.047 mm (0.0006 0.0019 inch)
(1) The measurement is taken inside the groove on the tapered pin bore.
(2) The measurement is the straight pin bore.

Caterpillar parts catalog:

Caterpillar parts catalog
TH514C, TH417C, TH407C, TH414C, TH406C, TH337C, TH336C, Telehandler Transmission DJB00001-00483 (MACHINE)
TH336C Telehandler MJR00271-UP (MACHINE)
TH406C Telehandler GAT00258-UP (MACHINE)
TH337C Telehandler DJB00484-UP (MACHINE)
TH407C Telehandler JJT00172-UP (MACHINE)
TH414C Telehandler KEK00373-UP (MACHINE)


Parts bracket Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.