BRACKET AS 9V9517 - Caterpillar

ACTION REQUIRED
Refer to the Service Manual if/as required and replace with same parts.
Note dimensional wear on components.
Identify the location and orientation of the Bearings and Pins. See rework procedure for labeling instructions.
Create a SIMS entry with photos of removed parts per each machine.
Refer to SEPD1688, "Procedure for Removal and Installation of the Bushing for the Oscillating Hitch" for removal and installation instructions.
Severe environments are environments with an increased likelihood of contamination or degradation of the lubricating capacity of the grease.
Refer to Operation and Maintenance Manual(SEBU8345), "Maintenance Interval Schedule" for proper grease and greasing intervals.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-7500 hrs,
0-36 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
7501-10000 hrs,
37-48 mo 33.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 23.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Label for each part:
Part Number:
Machine S/N:
Hours:
Failed Part Marking (use paint pen / permanent marker)
Hitch Pin (Upper):
Orientation (Arrow towards the front of machine)
Hitch Pin (Lower):
Orientation (Arrow towards the front of machine)
Steering Pins:
Orientation (Arrow towards the front of machine)
Example of upper hitch pin marking
Image1.2.1
Hitch Bearing (Lower / Upper):
Mark as "Lower" or "Upper" bearing. (L) or (U)
Orientation (Arrow towards the front of the machine)
Identify top side of the bearing (on end face). (T)
A-Frame Bearing:
Orientation (Arrow towards the front of the machine)
Identify top side of the bearing (on end face).(T)
Steering Bearings:
Mark as "Left side" or "Right side" bearing (Ls) or (Rs)
Orientation (Arrow towards the front of the machine)
Identify top side of the bearing (on end face). (T)
Example of upper hitch bearing marking:
Image1.3.1