AVSPARE.COM
parts catalog

BRACKET 9V9642 - Caterpillar



9V9642 BRACKET Caterpillar parts 936 BRACKET
Rating:
86
Alternative (cross code) number:
CA9V9642
9V-9642
9V9642
Caterpillar 9V9642 BRACKET
Weight: 47 pounds 21 kg.

Buy BRACKET 9V9642 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 9V9642:

WHEEL LOADER  936   Caterpillar
Number on catalog scheme: 7
 
  For full view, you need register

Information:


Set The Number Of Pumps : Select parameter "2", if two pumps are required. Two pumps are required in order to send hydraulic oil to the hammer through the combined function auxiliary line. See "Setting The Number Of Pumps".
Set The Pressure Of The Circuit For The Hammer : Enter the pressure that is required for the hammer. The pressure that is required for the hammer can be found in the specifications for the hammer. For example, if the pressure setting for the hammer is 17700 kPa (2567 psi), the formula is listed: 1 MPa () equals 1000 kPa () and 17700 kPa () divided by 1000 equals 17.7 MPa (2567 psi). Enter 18 MPa (2610 psi) by rounding off the result. See "Setting The Circuit Pressure".
Set The Flow For The Hammer Mode : Enter the required pump flow for the hammer. See "Setting The Pump Flow". The required pump flow can be found in the specifications for the hammer. Refer to item 6 when the speed of the hammer is a problem.
Set The Parameter That Requires High Flow To A Hammer : See the following information for a hammer that requires a flow rate of 250 L/min (66 US gpm) or more through the combined function auxiliary line:
Set the number of pumps to be used: Enter "1". See "Setting The Number Of Pumps".
Set the pressure for the hammer : Enter the pressure that is calculated by using the following formula:
For example, if the pressure setting for the hammer is 17700 kPa (2567 psi), the formula is listed: 1 MPa () equals 1000 kPa () and 17700 kPa () divided by 1000 equals 17.7 MPa (2567 psi). Enter 18 MPa (2610 psi) by rounding off the result. See "Setting The Circuit Pressure".
Set the pump flow to the hammer : Enter the flow that is calculated with the following formula:
The required flow that is described in the specification for the hammer is multiplied by 1/2. See "Setting The Pump Flow".
Illustration 2 g00663007
Monitor Panel
Preset The Hammer Mode : Select the "U2" Mode when a hydraulic hammer is used with auxiliary lines for the flow of two pumps. The maximum pump flow will be sent to the hammer, if the operator selects a work mode that is not "U2" resulting in damage to the hammer. This problem can be avoided by using a special security code to reset the preset of the hammer mode from the OFF position to the ON position.After this change is made to the software, the correct flow will be sent to the hammer when the pedal for the hammer is activated. The settings of the work mode do not affect this procedure.Note: The machine is set in the OFF position at the factory.
Access the service mode. Then, enter the service code "080251".
When "10" or "80" is display on the monitor, enter the new service code "89" on the character display.
The slow mode switch (25) is pressed in order to move the character to the right of the character

Caterpillar parts catalog:

Caterpillar parts catalog
936 WHEEL LOADER 45Z00001-03056 (MACHINE) POWERED BY 3304 ENGINE
936E WHEEL LOADER 45Z03057-UP (MACHINE) POWERED BY 3304 ENGINE


Parts bracket Caterpillar catalog:

5C8310 BRACKET-RING
216, 216B, 216B3, 226B, 226B3, 228, 231D, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267,...
6C2011 BRACKET AS
215B, 215D, 231D, 235C, 245, 916, 936, IT18B, IT28B
9V6613 BRACKET AS
936, 936F, G936
4E0365 BRACKET
938F, 950F, 950F II, 960F, 966F II, 970F, 980F, 988F, 988F II, IT18F
7X6013 BRACKET
938F, 950F, IT18F
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.