AVSPARE.COM
parts catalog

BRACKET AS 9W0142 - Caterpillar



9W0142 BRACKET AS Caterpillar parts D11N BRACKET
Rating:
55
Alternative (cross code) number:
CA9W0142
9W-0142
9W0142
Caterpillar 9W0142 BRACKET AS
Weight: 2 pounds 1 kg.

Buy BRACKET AS 9W0142 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 9W0142:

TRACK-TYPE TRACTOR  D11N   Caterpillar
Number on catalog scheme: 6
 
  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
If the engine has guards, remove the guards. Refer to the Original Equipment Manufacture (OEM) for the correct procedure. Note: Mark the direction of rotation of the alternator belt if the belt will be reused.
Illustration 1 g02017213
Typical example
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Remove alternator belt (1).
If necessary, Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction and remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
Illustration 2 g02017213
Typical example
If necessary, follow Step 1.a through Step 1.c in order to position the tensioner correctly.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X).
Ensure that the belt tensioner, pulleys, and all guide rollers are clean. Ensure that the pulleys and guide rollers are free from dirt and build up from the old belt.
Ensure that all components of the belt tensioner, pulleys, and guide rollers are clean and free from wear and damage. If necessary, replace any components that are worn or damaged. Refer to Disassembly and Assembly, "Belt Tensioner - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Flat Idler Pulley) - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Grooved Idler Pulley) - Remove and Install" for the correct procedure.
Position alternator belt (1). Ensure that the alternator belt is centered on all pulleys. A used alternator belt should be installed in the original direction of rotation. Note: The ribs on the alternator belt must be located into the grooves of all pulleys.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction. Remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool until the alternator belt is tensioned. Remove the 1/2" square drive tool from Hole (X). Note: The tensioner should be at the nominal position.
If the engine has guards, install the guards. Refer to the OEM for the correct procedure.

Caterpillar parts catalog:

Caterpillar parts catalog
D11N TRACTOR / POWER SHIFT / 74Z00001-UP (MACHINE) POWERED BY 3508 ENGINE


Parts bracket Caterpillar catalog:

8P0612 BRACKET
325, 325 L, 385B, 517, 527, 572R, 572R II, 589, 65C, 75, 75C, 75D, 793D, 824C, 834B, 836, 85C, 85D, 901C, 953D, 963D, 966D, 973D, 980C, 980F, 988B, 992C, 993K, 994, 994D, CB-434, CB-534B, CB-534C, D10...
7N5358 BRACKET
3508, 3508C, 3512, 3516, 777B, 785, D11N, PM3512
1750070 BRACKET
120G, 12G, 130G, 140G, 16G, 515, 517, 525, 525B, 525C, 527, 535B, 535C, 545, 545C, 613C, 615C, 631E, 633E II, 637E, 651E, 657E, 814F, 814F II, 815F, 815F II, 816F, 816F II, 924F, 938F, 950F II, 953C, ...
8Y5938 BRACKET AS
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16H, 16H NA, 24H, 5130, 5130B, 517, 5230, 5230B, 527, 561M...
6T4317 BRACKET AS
578, 583R, 587R, 589, D10, D10N, D11N, D6H, D6H XL, D7H, D8L, D9L, D9N, D9R
7G1502 BRACKET AS
D10, D10N, D11N, D6H, D6H XL, D6H XR, D7H, D8L, D8N, D9L, D9N, D9R
4W5464 BRACKET
776C, 776D, 777, 777B, 777D, 784B, 785, 785B, D11N, D11R
9U8402 BRACKET AS
D10N, D10R, D11N, D9N, D9R
6T9285 BRACKET
D10N, D8L, D9L, D9N
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.