AVSPARE.COM
parts catalog

BREATHER AS 4646410 - Caterpillar



4646410 BREATHER AS Caterpillar parts BREATHER
Rating:
21
Alternative (cross code) number:
CA4646410
464-6410
4646410
Caterpillar 4646410 BREATHER AS

Buy BREATHER AS 4646410 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 43 g02011440
Position cylinder (27) on blade assembly (E). Refer to Illustration 43.
Illustration 44 g02011442
Install one spacer (11) above cylinder (27) and one spacer (11) below cylinder (27) .
Illustration 45 g02011443
Install pin (12) with bolts (21), and retainer (13) in order to attach cylinder (27) to blade assembly (E). Lubricate pin (12) with 5P-0960 Grease prior to installation.Note: Remove all lifting devices from the machine.Note: Remove block (F) from beneath frame group (D) .Foldable Blade Instructions
Introduction
The following outlines the basic steps and procedure ti use in order to fold the left side of a 257-8113 Angling Blade .Note: All safety information, warnings, and instructions must be read and understood before performing any operation or any maintenance procedures.Shipping Information
Table 9
257-8113 Angling Blade    
Blade Weight    
1197 kg (2639 lb)    
Blade Width    
4082 mm (160.7 inch)    
Blade Height    
1277 mm (50.3 inch)    
Shipping overall width    
3000 mm (118.1 inch) with blade folded    Description of the Foldable Blade
Illustration 46 g02280815
Working position
Illustration 47 g02281519
Transportation positionNote: In transportation position, the blade must be parallel to the ground.Procedure to Fold the Blade
Illustration 48 g02283793
Unlock the removable side of the blade.
Slightly raise the blade in order to clear the blade from the ground.
Remove the cotter pin and pins (1) .
Pull out bar (2) after having removed both of the retention cotter pins.
Illustration 49 g02283814
Fold the removable side of the blade. Place the end of bar (2) in the hole at the top left corner of the blade and push in order to fold the blade.
Illustration 50 g02283840
Place bar (2) and pins (1) as shown in Illustration 50 in order to lock the removable side of the blade.Procedure to Unfold the Blade
Illustration 51 g02283840
Remove pins (1) and bar (2) in order to unlock the removable side of the blade.
Illustration 52 g02283814
Unfold the removable side of the blade. Place the end of bar (2) in the hole at the top left corner of the blade and push in order to unfold the blade.
Illustration 53 g02283793
Lock the removable side of the blade.
Place bar (2) at the rear of the blade and attach with two cotter pins.
Install pins (1) in order to secure the blade in the working position.


Parts breather Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.