AVSPARE.COM
parts catalog

BROOM-NYLON-5 1C4265 - Caterpillar



1C4265 BROOM-NYLON-5 Caterpillar parts BROOM
Rating:
16
Alternative (cross code) number:
CA1C4265
1C-4265
1C4265
Caterpillar 1C4265 BROOM-NYLON-5
Weight: 4 pounds 2 kg.

Buy BROOM-NYLON-5 1C4265 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

1. Remove seal (2) from shaft assembly (1).2. Fasten a hoist to shaft assembly (1). Remove 11 bolts (4). Install two 1/2 in - 13 NC forcing screws in shaft assembly (1). Tighten the forcing screws evenly, and remove shaft assembly (1). The weight of the shaft assembly is 26 kg (57 lb).3. If necessary, remove ring (3) from shaft assembly (1). The following steps are for installation of the pivot shafts.4. If ring (3) was removed from the shaft assembly, heat the ring to a maximum temperature of 135°C (275°F). Install ring (3) on shaft assembly (1).5. Fasten a hoist to shaft assembly (1). Put the shaft assembly in position on the frame, and install bolts (4).6. Install seal (2) on shaft assembly (1). Install the seal with the smaller diameter toward ring (3).End By:a. install track roller frames


Parts broom Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.