AVSPARE.COM
parts catalog

BUCKET AS-PENETRATION 9V9795 - Caterpillar



9V9795 BUCKET AS-PENETRATION Caterpillar parts 916, G916 BUCKET
Rating:
71
Alternative (cross code) number:
CA9V9795
9V-9795
9V9795
Caterpillar 9V9795 BUCKET AS-PENETRATION
Weight: 1648 pounds 747 kg.

Buy BUCKET AS-PENETRATION 9V9795 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 9V9795:

WHEEL LOADER  916   G916   Caterpillar
  For full view, you need register

Information:


Table 1
J1939 Code and Description Comments
1390-17
Engine Fuel Valve #1 Inlet Absolute Pressure : Low - least severe (1) The pressure provided to the fuel metering valve is less than the trip point and the delay time has expired.
The alarm output is activated.
The code is logged. Probable Causes
Low fuel supply pressure
Obstructed Fuel Line
Incorrect setting of the gas pressure regulatorRecommended Repairs
Table 2
Troubleshooting Test Steps Values Results
1. Check for Codes
A. Connect Cat® Electronic Technician (ET) to the service tool connector.
B. Look for active codes that are associated with the system for the event code.
Codes
Result: An associated code is active.
Repair: Troubleshoot any associated codes before continuing with this test.
Result: A 1390-17 code is active or logged.
Proceed to Test Step 2.
2. Monitor the Pressure Provided to the Fuel Metering Valve
A. Monitor the "Engine Fuel Valve #1 Inlet Absolute Pressure" parameter via Cat ET.
Pressure
Result: The pressure supplied to the valve is NOT within specification.
Proceed to Test Step 3.
3. Check the Filter Inlet Pressure
A. Check that the main supply pressure to the filter is within specification.
Pressure
Result: The pressure supplied to the regulator is within specification.
Proceed to Test Step 4.
Result: The pressure supplied to the regulator is NOT within specification.
Repair: Remedy the cause of the low supply pressure.
4. Check the Filter Outlet Pressure
A. Check that the pressure at the filter outlet is within specification.
Pressure
Result: The pressure drop across the filter is excessive.
Repair: Replace the filter.
Result: The pressure drop across the filter is OK.
The pressure supplied to the regulator is within specification.
Proceed to Test Step 5.
5. Check the GSOV Outlet Pressure
A. Check the pressure at the outlet of the electric Gas Shutoff Valve (GSOV). The GSOV is supplied from the regulator.
Pressure
Result: The pressure is within specification.
Proceed to Step 8.
Result: The pressure is NOT within specification.
Proceed to Test Step 6.
6. Check the Gas Shutoff Valve (GSOV) for proper operation
A. Verify that the valve is fully open when the valve is energized. Verify that the GSOV does not stick in a partially open position.
Operation
Result: The gas shutoff valve is NOT fully opening.
Repair: Repair the GSOV. Replace the GSOV, if necessary.
Result: The gas shutoff valve is OK.
Proceed to Test Step 7.
7. Adjust Regulator
A. Adjust the gas pressure regulator to achieve the correct pressure.
Pressure
Result: The correct pressure is NOT achieved.
Repair: Repair the regulator or replace the regulator.
Result: The correct pressure is achieved and the code still exists.
Proceed to Step 8.
Result: The correct pressure is achieved and the code no longer exists.
8. Check for Obstructions
A. Check the fuel supply lines to the fuel metering valve for obstructions.
B. Check the Inlet screen for the fuel metering valve.
Obstructions
Result: An obstruction was found.
Repair: Remedy the cause of the obstruction.
If the procedure did not correct the issue, contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solutions Network (DSN).

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
916 WHEEL LOADER 9WB00001-UP (MACHINE) POWERED BY 3204 ENGINE
916 WHEEL LOADER 2XB00001-UP (MACHINE) POWERED BY 3204 ENGINE
G916 WHEEL LOADER 5GD00001-00047 (MACHINE) POWERED BY 3204 ENGINE


Parts bucket Caterpillar catalog:

2692660 BUCKET & ADJUSTER GP
320D, 320D L, 324D L, 325D L, 329D L
2980236 BUCKET GP-HEAVY DUTY
336D L, 345B II, 345B L, 345C, 345D L
3925377 BUCKET AR-HEAVY DUTY
320D, 320D GC, 320D2, 323D2 L
9V8958 BUCKET AS-GENERAL PURPOSE
910G, IT12, IT12B, IT14B, IT14F, IT18, IT18B
2193388 BUCKET GP-HOE
416C, 416D, 416E, 416F, 420D, 420E, 420F, 424D, 428C, 428D, 430D, 430E, 430F, 432D, 442D
7Y9148 BUCKET AS
330, 330 FM L, 330 L
4266549 BUCKET AR-MULTIPURPOSE
216B3, 226B3, 236D, 242D, 246C, 246D, 247B3, 256C, 257D, 259D, 262C, 262D, 272D, 272D XHP, 277C, 277D, 279C, 279D, 287C, 287D, 289C, 289D, 299D, 299D XHP
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.