parts catalog

BUSHING 2H9178 - Caterpillar

2H9178 BUSHING Caterpillar parts D337 BUSHING
Alternative (cross code) number:
Caterpillar 2H9178 BUSHING

Buy BUSHING 2H9178 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 2H9178:

MARINE ENGINE  D337   Caterpillar
Number on catalog scheme: None
  For full view, you need register


Start By:a. separation of engine and transmission 1. Remove two bolts and install two 3/8' - 16 NC forged eyebolts (1) as shown. Fasten a hoist.2. Remove bolts (2) that hold the transfer gears to the transmission case. Remove transfer gears (3). The weight is 56 kg (125 lb.). 3. Remove O-ring seals (4) and (5) from the transmission case. The following steps are for installation of transfer gears.4. Make sure O-ring seals (4) and (5) are in position on the transmission case.5. Install two 3/8' - 16 NC forged eyebolts as shown and fasten a hoist. Put transfer gears (3) in position on the transmission and install the bolts that hold the transfer gears to the transmission case.End By:a. Connection of engine and transmissionDisassemble and Assemble Transfer Gears (3F/3R Power Shift)
Start By:a. remove transfer gears 1. Remove bolts (1), plate (2), and gear (3) from the transfer gear case. 2. Remove snap ring (4) with tool (B). Remove bearing (5) from gear (3). 3. Remove cage (6) from the transfer gear case, and O-ring seal from cage. 4. Remove bearing (7) from the transfer gear case with tooling (A). 5. Remove retaining ring (8) from the transfer gear case. 6. Remove yoke (9), O-ring seal (11) and bolts (10) that hold the bearing cage to the transfer gear case. 7. Install two 3/8" -16 NC forcing screws (12) in the bearing cage. Tighten the forcing screws evenly and remove bearing cage (13). 8. Remove shims (14) and O-ring seal (15) from bearing cage (13). 9. Remove lip-type seal (16) from bearing cage (13). 10. Remove bearing cup (17) from bearing cage (13). 11. Remove gear (18) from the transfer gear case. 12. Remove bearing cones (19) and (20) from gear (18). 13. Remove bearing cup (21) from the transfer gear case. The following steps are for assembly of the transfer gears.14. Inspect all parts for damage and make replacements if needed.15. Lower the temperature of bearing cup (21). Install bearing cup in the transfer gear case.16. Heat bearing cones (19) and (20) to a maximum temperature of 135° C (275° F). Install bearing cones on gear (18).17. Install gear (18) in the transfer gear case.18. Lower the temperature of bearing cup (17). Install bearing cup in bearing cage (13). 19. Use tooling (A) and install lip-type seal (16) with the lip of the seal toward the inside of the transfer gear case. Put clean oil on the lip of the seal. 20.

Caterpillar parts catalog:

Caterpillar parts catalog
D337 MARINE ENGINE 23B00300-00455

Parts bushing Caterpillar catalog:

120, 12F, 140, 14E, 16, 1673B, 1673C, 16G, 3176B, 3176C, 3181, 3192, 3196, 3208, 3304, 3304B, 3306, 3306B, 3306C, 330B L, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412...
16, 1693, 3406, 3408, 3412, 594, 594H, 621, 627, 631C, 631D, 633D, 637D, 651, 657B, 772, 966D, 977K, 988, 988B, D326F, D337, D342, D342C, D348, D353C, D364, D379, D379A, D397D, D398, D399, D44B, D5, D...
12E, 561B, 651, 657, 834, 955C, 955H, 977D, 977H, 988, D315, D320A, D326F, D337, D342, D342C, D343, D353C, D375D, D397D, D8H, D9E, D9G
D326F, D337, D342, D397D
12E, 12F, 14E, 824, 955H, D330A, D330B, D333A, D337, D342, D342C, D4D, G342C
594, 955C, D326F, D337, D337F, D342, D353C, D364, D9E, D9G
621, 621B, 621R, 623, 627B, 631C, 633C, 637D, 641, 641B, 651, 657B, 815, 816, 824B, 834, 950, 966C, 977D, 980, 980B, 988, 992, D315, D337
D337, D342, D364, D375D, D397D
955C, D326F, D337
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.