AVSPARE.COM
parts catalog

BUSHING-GUIDE 4646938 - Caterpillar



4646938 BUSHING-GUIDE Caterpillar parts BUSHING
Rating:
16
Alternative (cross code) number:
CA4646938
464-6938
4646938
Caterpillar 4646938 BUSHING-GUIDE
Weight: 0.15 pounds 0 kg.

Buy BUSHING-GUIDE 4646938 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Installation Procedure
Table 1
Tools Needed    
Tool     Part Number     Part Description     Qty    
A     1U-9200     Lever Puller Hoist     1    Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Attach Tooling (A) and a suitable lifting device to piston pump (9) . The weight of the piston pump is 45 kg (100 lb).
Illustration 1 g01333061
Install piston pump (9) . Install bolts (10) . Remove Tooling (A) .
Illustration 2 g01333056
Connect hose assemblies (8) .
Illustration 3 g01333049
Install bolt (7) . Connect five hose assemblies (6) .
Illustration 4 g01333039
Install bolts (5) . Connect harness assemblies (4) . Connect hose assemblies (3) .
Illustration 5 g01333037
Connect hose assemblies (2) .
Illustration 6 g01333034
Install block (1) .End By:
Install the floorplate. Refer to Disassembly and Assembly, "Floorplate - Remove and Install".
Install the piston pump. Refer to Disassembly and Assembly, "Piston Pump (Implement)".


Parts bushing Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.