AVSPARE.COM
parts catalog

CAB AR 3157087 - Caterpillar



3157087 CAB AR Caterpillar parts CAB
Rating:
11
Alternative (cross code) number:
CA3157087
315-7087
3157087
Caterpillar 3157087 CAB AR

Buy CAB AR 3157087 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Raise the hoppers and place bar (1) in the lock position.
Illustration 2 g01356277
Raise apron (2).
Illustration 3 g01356294
Remove the bolts and guard assemblies (3) and (4).
Illustration 4 g01356284
Remove cotter pin (5) and shaft (6). Turn shafts (7) counterclockwise in order to relieve the tension on drag conveyor (8).
Illustration 5 g01356306
Remove bolts (9) and nuts (10). Remove guard assemblies (11) and (12).
Remove the bolts and plate assembly (13).
Illustration 6 g01356318
Remove lock pins (14), side bars (15), and pins (16).
Repeat Step 7 on the other side of the drag conveyor.
Attach a suitable lifting strap to the bottom portion of the drag conveyor. Pull the bottom portion of the drag conveyor to the rear of the machine.
Illustration 7 g01356345
Attach a suitable lifting device to drag conveyor (8). Remove drag conveyor (8) from the machine. The weight of drag conveyor (8) is approximately 240 kg (530 lb).
Repeat Steps 1 through 10 in order to remove the remaining drag conveyor, if necessary. Installation Procedure
Illustration 8 g01356345
Use a suitable lifting device in order to position drag conveyor (8) on the machine. The weight of drag conveyor (8) is approximately 240 kg (530 lb).
Attach a suitable lifting strap to the bottom portion of drag conveyor (6). Pull the bottom portion of the drag conveyor to the front of the machine. Remove the suitable lifting device and the suitable rope.
Illustration 9 g01356318Note: During the installation of lock pins (14), bend the bottom of the lock pins toward the front of the machine.
Bring the ends of the drag conveyor together. Install pins (16), side bars (15), and lock pins (14).
Repeat Step 3 on the other side of the drag conveyor.
Illustration 10 g01356306
Install plate assembly (13) and the bolts.
Install guard assemblies (12) and (11). Maintain a clearance of 5 2.0 mm (0.2 0.08 inch) between the guard assemblies and the drag conveyor. Install nuts (10) and bolts (9).
Illustration 11 g01356284
Turn shafts (7) clockwise and tighten the tension on drag conveyor (8). Refer to Operation and Maintenance Manual, "Drag Conveyors - Adjust" in order to adjust the tension on the drag conveyor.
Install shaft (6) and cotter pin (5).
Illustration 12 g01356294
Install guard assemblies (4) and (3). Maintain a clearance of 5 2.0 mm (0.2 0.08 inch) between the guard assemblies and the drag conveyor.
Repeat Steps 1 through 9 in order to install the remaining drag conveyor, if necessary.
Illustration 13 g01356277
Lower apron (2).
Illustration 14 g01356276
Slide bar (1) outward and lower the hoppers. End By:
Install the auger conveyor. Refer to Disassembly and Assembly, "Auger Conveyor - Install".


Parts cab Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.