AVSPARE.COM
parts catalog

CAB A 9W0029 - Caterpillar



9W0029 CAB A Caterpillar parts CAB
Rating:
71
Alternative (cross code) number:
CA9W0029
9W-0029
9W0029
Caterpillar 9W0029 CAB A
Weight: 19 pounds 8 kg.

Buy CAB A 9W0029 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

2. Remove the bolts that hold elbow (4) and bracket (3) to the oil pan.3. Remove the bolts that hold elbow (1) to the oil pump. Remove elbow (1), tube (2) and elbow (4) as an assembly.4. Disconnect electrical connection (5) from the oil pan. 5. Remove the bolts and retainers that hold tube (6) in position in the oil cooler. 6. Remove the bolts and clips (11) that hold tube (6) to the oil pan. Remove tube (6) from adapter, (9) and the oil cooler.7. Disconnect tube assembly (7) from the oil pan. 8. Remove the bolts that hold tube assembly (8) to the oil pan, and remove the tube assembly. Disconnect hose (13) and electrical connection (14) from the oil pan.9. Remove the bolts that hold oil pan (12), and use two persons to remove the oil pan from the engine. The weight of oil pan (12) is 45 kg (99 lb).10. Remove the bolts that hold oil pan (10), and use a suitable lifting device to remove it from the engine. The weight of oil pan (10) is 58 kg (128 lb). The following steps are for installation of the oil pan.11. Make sure the gaskets are in position. Put 7M7260 Liquid Gasket Material on all gasket joints.12. Use a suitable lifting device and put oil pan (10) in position under the front of the engine. Install the bolts that hold the oil pan to the engine.13. Use two persons, and put oil pan (12) in position under the rear of the engine. Install the bolts that hold oil pan (12) to the engine and oil pan (10).14. Connect tube assembly (7), hose (13), and electrical connection (14) to the oil pan.15. Put tube assembly (8) in position in the oil pan, and install the two bolts that hold it.16. Put tube (6) in position in the oil cooler and elbow (9). Install clips (11) and the bolts that hold tube (6) to the oil pan.17. Install the retainers and bolts that hold tube (6) in the oil cooler.18. Connect electrical connection (5).19. Put elbow (4), tube (2), elbow (1) and bracket (3) in position, and install the bolts that hold them in place.20. Fill the engine with oil to the correct level. See the Maintenance Manual.


Parts cab Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.