CABLE AS 3079159 - Caterpillar

Illustration 1 g02787636
Table 1
Specification for 349-4109 Blade Cylinder Gp
Item Qty Part Specification Description
1 1 099-0695 Ring Before assembly, apply red High Temperature RTV Silicone Sealant to the hole.
2 1 273-6945 Bushing During the press fit, insert the bushing (2) in the cap assembly with the tapered side first.
Inside diameter before assembly is 60.15 0.04 mm (2.368 0.002 inch).
Installation depth is 9.85 0.50 mm (0.388 0.020 inch).
3 1 326-4417 Locknut Before assembly, apply 309-6932 Hydraulic Oil to the face and threads all around.
Torque to 4500 230 N m (3319 170 lb ft).
4 1 119-5445 Ring Lubricate the inside diameter and the outside diameter with clean grease.
5 1 9X-3592 Seal As Lubricate the inside diameter and the outside diameter with clean grease.
6 1 143-8027 Ring Lubricate the inside diameter and the outside diameter with clean grease.
B 1 326-4446 Hydraulic Cylinder Bore is 120.00 0.10 mm (4.724 0.004 inch).
C 1 283-6083 Rod As Diameter is 79.93 0.03 mm (3.147 0.001 inch).
D 1 123-9950 Head Bore over two lands is 80.53 0.03 mm (3.170 0.001 inch).
7 Prior to drilling operation, tighten the head to 1100 110 N m (811 81 lb ft).
8 1 273-6945 Bushing Inside diameter before assembly is 60.15 0.04 mm (2.368 0.002 inch).
Installation depth is 10.0 0.5 mm (0.39 0.02 inch).
9 1 114-0755 Bushing Outside diameter is 85.133 0.033 mm (3.3517 0.0013 inch).
Thickness is 2.475 0.025 mm (0.0974 0.0010 inch).
10 1 355-5814 Buffer Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
11 1 355-5816 U-Cup Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
12 1 165-9285 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
13 - - Before assembly, apply green Loctite 609 to the wiper seal groove.