3967120 CABLE AS Caterpillar parts
844K, 990K
Rating:
Alternative (cross code) number:
CA3967120
396-7120
3967120
CA3967120
396-7120
3967120
Weight: 7 pounds 3 kg.
WHEEL DOZER, WHEEL LOADER,
Number on catalog scheme:
25
For full view, you need register
Information:
Manual Burner Control
Stop the machine on level ground. Stop the machine in an area away from the mat. If it is necessary to park the machine on a grade, block the tires securely.Note: When you use the fuel spray hose, do not spray the fuel on the following components: hydraulic hoses, electrical connections and electrical cables.
Illustration 1 g00854136
Connect the spraydown hose to the fuel line connection.With each use, the fuel spray hose will need to be connected or disconnected. If the machine is equipped with a hose reel, open the access cover on the right side of the machine. Pull out the necessary amount of hose.
Illustration 2 g00781859
Move the screed fuel pump switch to the SPRAYDOWN position (1). This will supply fuel to the spraydown hose.
Pull the trigger in order to start the spraydown. Release the trigger in order to stop the spraydown.
Spray the entire auger conveyor in order to clean the auger. Spray the auger in order to lubricate the auger. Clean the front of the screed and the bottom of the screed.
The screed could fall. In order to avoid possible personal injury, extend the screed travel locks whenever the screed is raised.
Disconnect the spraydown hose when machine cleanup is complete. If the machine is equipped with a hose reel, return the spraydown hose to the side compartment. Close and secure the access cover.
Stop the machine on level ground. Stop the machine in an area away from the mat. If it is necessary to park the machine on a grade, block the tires securely.Note: When you use the fuel spray hose, do not spray the fuel on the following components: hydraulic hoses, electrical connections and electrical cables.
Illustration 1 g00854136
Connect the spraydown hose to the fuel line connection.With each use, the fuel spray hose will need to be connected or disconnected. If the machine is equipped with a hose reel, open the access cover on the right side of the machine. Pull out the necessary amount of hose.
Illustration 2 g00781859
Move the screed fuel pump switch to the SPRAYDOWN position (1). This will supply fuel to the spraydown hose.
Pull the trigger in order to start the spraydown. Release the trigger in order to stop the spraydown.
Spray the entire auger conveyor in order to clean the auger. Spray the auger in order to lubricate the auger. Clean the front of the screed and the bottom of the screed.
The screed could fall. In order to avoid possible personal injury, extend the screed travel locks whenever the screed is raised.
Disconnect the spraydown hose when machine cleanup is complete. If the machine is equipped with a hose reel, return the spraydown hose to the side compartment. Close and secure the access cover.