CABLE-BULK 4647397 - Caterpillar

Removal Procedure
Note: Put identification marks on all hoses and on all harness assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1P-1859     Retaining Ring Pliers     1    
Illustration 1 g01335437
Remove covers (not shown).
Remove nut (1) and lockwasher (2). Disconnect hose (3).
Use Tooling (A) to remove retaining ring (4). Remove washer (5) .
Remove wiper arms (6) .
Illustration 2 g01335458
Remove cover (7). Remove nut (9) and gasket (10) .
Remove washer (8). Remove stud (11) and gasket (12) .
Illustration 3 g01335479
Remove screws (13). Remove cover (14). Remove mirror (15) .
Illustration 4 g01335485
Remove screws (16) .
Illustration 5 g01335491
Disconnect harness assembly (17). Remove wiper motor (18) .