AVSPARE.COM
parts catalog

CANOPY AS 3534197 - Caterpillar



3534197 CANOPY AS Caterpillar parts 993K CANOPY
Rating:
85
Alternative (cross code) number:
CA3534197
353-4197
3534197
Caterpillar 3534197 CANOPY AS

Buy CANOPY AS 3534197 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 3534197:

WHEEL LOADER  993K   Caterpillar
Number on catalog scheme: 3
 
  For full view, you need register

Information:

This Program must be administered as soon as possible. When reporting the repair, use "PI1243" as the Part Number, "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description Code. Exception: If the repair is done after failure, use "PI1243" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
Problem
The internal rotation stops in the speed selector potentiometers may fail allowing an operator to dial through the minimum speed position to the maximum speed position on certain AP-1000 Asphalt Pavers.
Affected Product
Model & Identification Number
AP1000 (1HD1-73, 1HD75-77)
Parts Needed
Dealers will need to order parts for this Program.
2 - 7C4550 Seal-Rotating Shaft1 - 1127515 Potentiometer Assembly1 - 1127517 Potentiometer AssemblyAction Required
Parts Stock
Remove all 1G9663, 1G9664, 6R0087 and 6R0088 Potentiometers from Parts Stock.
Affected Product
Refer to pages 104-107.04 of the AP-1000 Asphalt Paver Parts Manual (KEBP0084-01) and to the AP-1000 Asphalt Paver Electrical System Schematic (KENR1848) for Illustrations for this rework.
1. Loosen the right-hand console speed selector control potentiometer 1P6515 Knob retaining setscrew. Remove the knob and retain.2. Remove the eight 2Y1020 Screws retaining the 6R0105 right-hand control console panel group. Retain the screws.3. Pull the panel out of the console to gain access to the back.4. Remove the 7C4550 Shaft Seal from the 6R0087 Potentiometer (1G9663 Potentiometer on later models).5. Remove the 6R0087 Potentiometer Assembly from the panel. Disconnect the potentiometer harness from the console electrical components. Note the electrical connection locations. The new potentiometer assembly will be installed in an identical manner.6. Install the new 1127515 Potentiometer Assembly in the panel. Retain with a new 7C4550 Shaft Seal. Tighten to a torque of 1.1 .1 N m (10 1 in.lb.).7. Attach harness wires to the correct terminal locations as follows: 8. Install the 6R0105 Panel into the console. Retain with the eight 2Y1020 Screws.9. Rotate the potentiometer shaft to the maximum "CCW" position. Install the 1P6515 Knob with the index mark aligned with the "Slow" position on the panel face. Tighten the retaining setscrew.10. Loosen the left-hand console speed selector control potentiometer 1P6515 Knob retaining setscrew. Remove the knob and retain.11. Remove the eight 2Y1020 Screws retaining the 6R0106 left-hand control console panel group. Retain the screws.12. Pull the panel out of the console to gain access to the back.13. Remove the 7C4550 Shaft Seal from the 6R0088 Potentiometer Assembly (1G9664 on later models).14. Remove the 6R0088 Potentiometer Assembly from the panel. Disconnect the potentiometer harness from the console electrical components. Note the electrical connection locations. The new potentiometer assembly will be installed in an identical manner.15. Install the new 1127517 Potentiometer Assembly in the panel. Retain with a new 7C4550 Shaft Seal. Tighten to a torque of 1.1 .1 N m (10 1 in.lb.).16. Attach harness wires to the correct terminal locations as follows: 17. Install the 6R0106 Panel into the console. Retain with the eight 2Y1020 Screws.18. Rotate the potentiometer shaft to the

Caterpillar parts catalog:

Caterpillar parts catalog
993K Wheel Loader Z8D00001-UP (MACHINE) POWERED BY C32 Engine
993K Wheel Loader Z8Z00001-UP (MACHINE) POWERED BY C32 Engine
993K Wheel Loader Z4Z00001-UP (MACHINE) POWERED BY C32 Engine
993K Wheel Loader Z4D00001-UP (MACHINE) POWERED BY C32 Engine


Parts canopy Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.