parts catalog

CAP 0005648 - Caterpillar

0005648 CAP Caterpillar parts CAP
Alternative (cross code) number:
Caterpillar 0005648 CAP
Weight: 0.100 pounds 0 kg.

Buy CAP 0005648 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Illustration 25 g00832352
Install lift control valve (35) on the rods.
Assemble the tilt control valve, as follows:
Illustration 26 g00832348
For the assembly of valve spool assembly (27), perform Step 3.a through Step 3.c.
Install valve spool assembly (27) in the manifold.
Illustration 27 g00832346
Install cap (26) and allen head screws (25). Tighten the allen head screws to a torque of 7 1 N m (62 9 lb in).
Illustration 28 g00832345
Install O-ring seal (24) and wiper (23) .
Illustration 29 g00832344
Install plate (22) and allen head screws (21) .
Illustration 30 g00832342
Install O-ring seal (20), valve (19), and spring (18) .
Illustration 31 g00832340
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install tilt control valve (17) on the rods.
Assemble the relief valve, as follows:
Illustration 32 g00842438
Install O-ring seal (16). Install valve (15), plunger assembly (14), spring (13), and spring (12) in housing (8) .
Illustration 33 g00842437
Install backup ring (10). Install O-ring seal (11). Install O-ring seal (9).
Install valve body (7) in housing (8). Tighten valve body (7) to a torque of 45 5 N m (33 4 lb ft). Install nut (6). Tighten nut (6) to a torque of 10 1 N m (84 12 lb in).
Illustration 34 g00832335
Install relief valve (4) in the manifold. Tighten relief valve (4) to a torque of 45 N m (33 lb ft).
Install O-ring seal (5) .
Illustration 35 g00832334
Install manifold (3) on the rods.
Illustration 36 g00842436
Install nut (2) on the rod. Tighten nut (2) to a torque of 45 5 N m (33 4 lb ft). Install nuts (2A) on the rods. Tighten nuts (2A) to a torque of 19 2 N m (14 2 lb ft).
Illustration 37 g00832331
Install the block valve on mounting bracket (1A) with socket head bolts (1) .End By: Install the bank valve. Refer to Disassembly and Assembly, "Bank Valve (Main Hydrauilc) - Install".

Parts cap Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.