CARRIAGE AS-FORK 9V9076 - Caterpillar

Illustration 1 g06025013
Table 1
Specification for 319-0675 Unit Injector Hydraulic Pump Gp
Item Qty Part Specification Description
1 4 228-5897 Bolt Torque to 33 5 N m (292 44 lb in).
2 3 313-4620 Screw Torque to 10 1 N m (89 9 lb in).
3 - - Torque for the fitting for the fuel inlet port is 23 2 N m (204 18 lb in).
4 - - Torque for the fitting for the fuel outlet port is 23 2 N m (204 18 lb in).
Illustration 2 g06025026
Table 2
Item Qty Part Specification Description
5 1 8C-6711 Retainer Nut Torque to 5.5 0.5 N m (48.7 4.4 lb in).
6 1 5C-2890 Nut Torque to 8 1 N m (71 9 lb in).
A - - Installation depth for the needle bearing assembly in the barrel is 28.90 0.20 mm (1.137 0.008 inch).
7 1 1N-8062 Needle Bearing As Install bearing so that the end of the bearing with the identification number is oriented as shown in illustration .
Illustration 3 g06025033
Table 3
Item Qty Part Specification Description
8 1 153-7036 Spool Install the spool until the spool is fully seated against the shoulder of the block.