AVSPARE.COM
parts catalog

CARRIER, BEARING 70000274 - Caterpillar



70000274 CARRIER, BEARING Caterpillar parts CB-514 CARRIER
Rating:
58
Alternative (cross code) number:
CA70000274
7000-0274
70000274
Caterpillar 70000274 CARRIER, BEARING

Buy CARRIER, BEARING 70000274 Caterpillar genuine, new aftermarket tractor parts with delivery
VIBRATORY COMPACTOR,

Compatible equipment models: 70000274:

VIBRATORY COMPACTOR  CB-514   Caterpillar
Number on catalog scheme: 11
 
  For full view, you need register

Information:

Backlash Check with an Assembled Power Train
When testing and adjusting the transmission and power train, move the machine to an area clear of obstructions, with safe exhaust ventilation for the exhausts. Sudden movement of the machine or release of oil under pressure can cause injury to persons on or near the machine. To prevent possible injury, do the procedure that follows before testing and adjusting the transmission and power train.
Before you begin the test, refer to Systems Operation, Testing and Adjusting, "Machine Preparation for Troubleshooting".
Table 1
Required Tooling    
Ref No.     Pt. No.     Description     Quantity    
A     8T-5096     Dial Indicator Gp     1    
B     127-8072     Backlash Gauge     1    
Table 2
Specifications for Adjustments    
Model     Assembled backlash    
12H    
0.25 + 0.10 - 0.07 mm (0.010 + 0.004 - 0.003 inch)    
120H    
135H    
140H    
143H    
160H    
163H    
Illustration 1 g00904663
(1) Yoke (2) Housing (3) Pinion shaft
Remove the drive shaft.
Illustration 2 g01053633
Remove yoke (1). Remove housing (2) .
Attach Tooling (B) to the splines on pinion shaft (3) .
Attach the magnetic base of Tooling (A) to the carrier.
Illustration 3 g01053638
Take three evenly spaced readings (approximately every 120 degrees) at Position (A) for the following machines: 120H and 135H.Note: If you take the readings at Position 2A divide each reading by two.
Take three evenly spaced readings (approximately every 120 degrees) at Position B for the following machines: 12H, 140H, 143H, 160H and 163H.Note: If you take the readings at Position (2B) divide each reading by two.
Refer to Table 2 for the backlash values.
If the backlash values are not within the acceptable tolerance, refer to Disassembly and Assembly, "Differential and Bevel Gear - Assemble" for the correct adjustment procedures.

Caterpillar parts catalog:

Caterpillar parts catalog
CB-514 VIBRATORY COMPACTOR 6YD00001-UP (MACHINE) POWERED BY 3.53 ENGINE


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.