1695063 CARTRIDGE GP Caterpillar parts 325B L, 330B L, 345B L, 5080 CARTRIDGE
Rating:
Alternative (cross code) number:
CA1695063
169-5063
1695063
CA1695063
169-5063
1695063
Weight: 0.55 pounds 0 kg.
EXCAVATOR, FRONT SHOVEL,
Number on catalog scheme:
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 316-1752 Bracket 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Inspect the O-ring seals. Replace the O-ring seals that are worn or damaged.
Illustration 1 g01432838
Illustration 2 g01432965
Install O-ring seal (14). Use Tooling (A) and a suitable lifting device in order to install piston pump (13). The weight of piston pump (13) is approximately 70 kg (155 lb). Install bolts (12) .
Illustration 3 g01432778
Connect hose assembly (11). Connect tube assembly (10) .
Illustration 4 g01432774
Connect hose assembly (9) .
Illustration 5 g01432772
Connect hose assembly (8) .
Illustration 6 g01432768
Connect hose assemblies (7) .
Illustration 7 g01432755
Connect hose assemblies (6). Turn the fuel supply to the ON position.
Illustration 8 g01432749
Install clips (5) .
Illustration 9 g01432703
Connect hose assembly (4) .
Illustration 10 g01432688
Install clips (3) .
Illustration 11 g01432686
Install panel (2). Close door (1) .
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 316-1752 Bracket 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Inspect the O-ring seals. Replace the O-ring seals that are worn or damaged.
Illustration 1 g01432838
Illustration 2 g01432965
Install O-ring seal (14). Use Tooling (A) and a suitable lifting device in order to install piston pump (13). The weight of piston pump (13) is approximately 70 kg (155 lb). Install bolts (12) .
Illustration 3 g01432778
Connect hose assembly (11). Connect tube assembly (10) .
Illustration 4 g01432774
Connect hose assembly (9) .
Illustration 5 g01432772
Connect hose assembly (8) .
Illustration 6 g01432768
Connect hose assemblies (7) .
Illustration 7 g01432755
Connect hose assemblies (6). Turn the fuel supply to the ON position.
Illustration 8 g01432749
Install clips (5) .
Illustration 9 g01432703
Connect hose assembly (4) .
Illustration 10 g01432688
Install clips (3) .
Illustration 11 g01432686
Install panel (2). Close door (1) .
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".